AbradePlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS

Abrade is based on amorphous silica, providing insecticidal activity through physical cutting and abrading, not chemical action on the insect. It effectively controls organo-phosphate tolerant strains of insects in stored grain, offering protection for up to 12 months, provided excess moisture is not present.

Compatibility:

• Can be mixed with certain insecticides for pest control in cotton.
• Compatibility with other pesticides has not been tested; always mix small quantities before commercial application.

Mixing:

• Thoroughly shake and invert the container before opening.
• Half-fill the spray tank with water, engage the agitator system, add the required amount of Abrade, and complete with the remaining water.

Application:

• The abrasive action may damage brass nozzles, so ceramic nozzles are recommended.
• The mixed product dries rapidly, so empty the spray tank after use, flushing tank, hoses, and nozzles with clean water.
• Avoid leaving the spray mixture without constant agitation and mix only the required quantity for immediate use.

Cotton, Canola:

• Ground Application: Apply in 80-100 liters of water per hectare with ceramic nozzles following an egg lay.
• Aerial Application: Apply in 30L to 60L water per hectare.

Grain Storages:

• For small storages, apply with a standard backpack or mechanical sprayer through flat-fan jet nozzles at 300-400 kPa.
• For large storages, use spray equipment delivering a narrow spray band through appropriate flat-fan nozzles.

Horticultural Crops:

• Ground Application: Apply in 200L to 750L/ha following an egg lay.

Resistance Warning:

• Abrade acts by cutting and abrading, not belonging to any chemical group. While resistance development is unlikely, users are cautioned to avoid excessive sole use.

Precautions:

• DO NOT use human flaggers/markers without protection.
• Re-entry into treated areas is prohibited until the spray has dried.
• Protect wildlife, fish, crustaceans, and the environment from contamination.

Spray Drift:

• May occur under adverse conditions; avoid application under weather or equipment conditions causing spray drift onto sensitive areas.

Field Testing:

• Abrade may pose some risk to beneficial organisms but populations will generally recover.

Storage and Disposal:

• Store in a cool, dry, well-ventilated area, out of direct sunlight.
• Triple or pressure rinse containers before disposal; do not dispose of undiluted chemicals onsite.
• If recycling, return clean containers; if not, bury empty containers in a landfill or disposal pit, clear of waterways, vegetation, and tree roots.

Safety Directions:

• May irritate eyes and skin; avoid contact. DO NOT inhale spray mist.
• Wear protective clothing and equipment during handling and application.
• Wash hands and clothing after use; dispose of excess spray slurry appropriately.