Arrow CPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS for Arrow C Seed Dressing Flowable:

Seed Treatment:

• Arrow C Seed Dressing Flowable can be applied to seed at any time from harvesting to sowing.
• Treated seed can be stored for sowing in the following season.
• The product contains cypermethrin for protection against insect pests of stored grain.

Application Rates:

• Apply neat at 100mL/100kg of seed or diluted with up to 500mL of water/100kg of seed (total application volume: 600mL/100kg).
• Calculate the amount of water required using the provided mixing table.
• Add half the volume to the tank, then add the required amount of Arrow C Seed Dressing Flowable.
• Make up the final volume with water and mix thoroughly.
• If left for an extended period (e.g., overnight), agitate thoroughly before use.
• DO NOT allow standing for more than 24 hours.

Application Guidelines:

• Choose the lowest application volume necessary for full seed coverage with the selected equipment.
• Volumes greater than 600mL may result in excessive wetting of the seed.
• Proper coverage of each grain is essential for disease control.

Undiluted Application:

• Use accurately calibrated equipment designed for proper seed coverage at low application volumes.

Diluted Application:

• Use correctly calibrated seed treatment equipment to ensure proper grain coverage.

Compatibility:

• Arrow C Seed Dressing Flowable should be applied to grain alone and NOT mixed with any other product.

Crop Safety:

• DO NOT apply Vydate* to seed pre-treated with Arrow C Seed Dressing Flowable.

Cleaning Equipment:

• Clean equipment with water after use.
• A detergent may be used to assist in removing dry deposits.

Note: Always adhere to safety precautions and follow label instructions for proper handling, application, and disposal. This is a summary; refer to the complete product label for detailed instructions.