Axy-MPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS

Instructions: AXY-M is designed to control Damping-off diseases caused by Pythium and Phytophthora and provides control of Stem Rot caused by Phytophthora for 3 to 4 weeks after emergence. It's important to note that AXY-M will not control Damping-off caused by Rhizoctonia, Fusarium, or other fungi.

APPLICATION

Treatment in small lots by the farmer:

• Premix AXY-M with water to a total volume of not less than 5 mL nor more than 10 mL per kg of seed when AXY-M is applied alone.
• If additional seed treatments are applied in combination with AXY-M, a higher total application volume may be required to ensure even coverage of seed.
• Apply the solution to the seed and vigorously mix for 1 to 2 minutes.
• May be applied by shaking with seed in a tin, enclosed drum, or plastic bag.

Treatment of large seed lots by commercial seed-treatment equipment:

• For large-scale seed treatment, the product should be applied diluted with water in specialized seed treatment equipment.
• A good flow and metering system for the initial prepared solution are important.
• Depending on the type of seed treatment equipment, it may be necessary to increase the recommended amount of water slightly to ensure an optimal flow of the solution and an even treatment of seed.
• Prepare the solution by filling the solution tank with the required volume of water and mix it with the appropriate volume of AXY-M.
• Total volumes of not less than 500 mL nor more than 1 L water/100 kg of seed are recommended when AXY-M is applied alone.
• If additional seed treatments are applied in combination with AXY-M, a higher total application volume may be required to ensure even coverage of seed.
• Switch on the stirring system and stir.
• The prepared solution must be used within 1 week.