Bespray 500Plant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS:

Before opening, carefully read Directions for Use, Precautionary Statements, Safety Directions, and First Aid Instructions.

MIXING: Mix with the required amount of water in the spray tank or mixing vessel. Apply using a low-volume boom spray fitted with fan jets or by aircraft. Use mains or rainwater for mixing. If not available, water with a hardness of less than 500 ppm (expressed as calcium carbonate equivalent) can be used but is not preferred. DO NOT tank mix Ammonium sulphate with BESPRAY in hard water as this may cause nozzle blockages.

APPLICATION: Apply using boom or spot spray equipment. Application must be uniform. Adjust nozzle type, output, speed, and pressure to deliver a Coarse spray quality (ASAE S 527) in 110-220 liters per hectare by ground application and a minimum of 40 liters of water per hectare by aerial application.

COMPATIBILITY: BESPRAY is compatible with Broadstrike but not for control of Paterson's curse or doublegee - refer to Broadstrike label. The effectiveness of Dimethoate, Metasystox, Le Mat, and Imidan may be reduced by alkaline hydrolysis if tank-mixed with this product. For these situations, the addition of LI-700 or Acidowett is recommended, which should be added to the tank first. The addition of Bonza Spray Adjuvant can improve control of weeds under some conditions, such as moisture stress, but may also increase early effects on legumes. When tank mixing, add the required amount of compatible product (and surfactant if recommended) when the spray tank is nearly full and while continuously agitating. If left overnight, agitate thoroughly before spraying.

RESISTANT WEEDS WARNING: BESPRAY 500 Herbicide is a Group I herbicide. Some naturally occurring weed biotypes resistant to BESPRAY 500 Herbicide and other Group I herbicides may exist through normal genetic variability in any weed population. Since the occurrence of resistant weeds is difficult to detect prior to use, the manufacturer accepts no liability for any losses that may result from the failure of BESPRAY 500 herbicide to control resistant weeds.

PROTECTION OF CROPS, NATIVE AND OTHER NON-TARGET PLANTS: Avoid spray drift onto nearby susceptible plants, adjacent crops, crop lands, or pastures. Avoid spray drift and vapor movement onto susceptible crops such as cotton, tobacco, tomatoes, vines, lupins, fruit trees, and ornamentals.

PROTECTION OF LIVESTOCK: Exercise caution when using Spray-Grazing technique to control pasture weeds. Some sprayed weeds become more palatable to stock, which can cause stock deaths and other problems. Avoid grazing with young or breeding stock. DO NOT graze horses or pigs in Paterson's curse (Salvation Jane) infested pasture.

PROTECTION OF WILDLIFE, FISH CRUSTACEANS, AND ENVIRONMENT: DO NOT contaminate streams, rivers, or waterways with this product or used containers.

STORAGE AND DISPOSAL: Store in the closed, original container in a cool, well-ventilated area away from direct sunlight. Triple or preferably pressure rinse containers before disposal. DO NOT dispose of undiluted chemical on-site. Wash outside of the container and the cap. If not recycling, deliver empty packaging for appropriate disposal to an approved waste management facility. DO NOT burn empty containers or product.

SAFETY DIRECTIONS: Poisonous if swallowed. May irritate the eyes and skin. Avoid contact with eyes and skin. DO NOT inhale spray mist. When preparing spray, wear appropriate protective clothing. If product comes into contact with the skin, immediately wash the area with soap and water. After each day's use, wash gloves, face shield, and contaminated clothing.