Clear Up 840 Dri-Flo

Manufacturer
Profeng
Category
Herbicides
Registered until
2024-06-30
Registration number
59077
Active materials
Links

GENERAL INSTRUCTIONS:

PRODUCT INFORMATION: Rygel ClearUp 840 Dri-Flo Herbicide is a non-volatile, water-soluble granule product with non-selective herbicidal activity against many annual and perennial broadleaf weeds and grasses. It is absorbed by plant foliage and green stems, inactivated immediately in the soil, and does not provide residual weed control. The herbicide moves throughout the plant from the point of contact to and into the root system.

  • Visible effects on annual weeds take 3-7 days, while on perennial weeds, it may take 2 to 3 weeks or longer.
  • Rygel ClearUp 840 Dri-Flo Herbicide is recommended for control of emerged weeds prior to crop establishment.
  • Suitable cultivation and/or sowing operations are required to provide seedbed conditions satisfactory for crop germination and development.

RESISTANT WEEDS WARNING: GROUP M HERBICIDE: Rygel ClearUp Dri-Flo Herbicide is a member of the Glycines group of herbicides, with the inhibition of EPSP synthase mode of action. It is a Group M herbicide. Some naturally occurring weed biotypes resistant to Rygel ClearUp 840 Dri-Flo Herbicide and other Group M herbicides may exist, and repeated use can lead to dominance by resistant weeds.

CROP ESTABLISHMENT: Rygel ClearUp 840 Dri-Flo Herbicide is recommended for control of emerged weeds prior to crop establishment. Suitable cultivation and/or sowing operations are required to provide seedbed conditions satisfactory for crop germination and development.

  • Spraying early to control young weeds will favor the preparation of suitable seedbeds.
  • In marginal seedbed conditions, take care to achieve correct seeding depth and avoid the use of pre-emergent herbicides where labels advise the risk of retarded crop emergence.

MIXING:

  • Water volumes should not be less than 25 liters per 1 kg of Rygel ClearUp 840 Dri-Flo Herbicide.
  • Do not mix, store, or apply this product in galvanized steel or unlined steel containers or spray tanks.
  • Spray tanks, pumps, lines, and nozzles should be thoroughly cleaned with clean water following application to prevent corrosion.

SURFACTANT ADDITION: Always add the Rygel Sonar Non-ionic Surfactant at a rate of 300 mL to 500 mL per kg of Rygel ClearUp 840 Dri-Flo Herbicide. Use the lower rate when using the maximum label rate and when weeds to be sprayed are immature, actively growing, and not waxy, hairy, or hard to wet.

TANK MIXTURES: Rygel ClearUp 840 Dri-Flo Herbicide may be tank-mixed with the following herbicides, insecticides, and additives. Read and follow all label directions for the tank-mix products.

  • Fill the spray tank 1/3 to 1/2 full with clean water and start agitation.
  • Wash crystalline ammonium sulfate through a top mesh-screen into the tank if recommended.
  • Add recommended herbicide/insecticide/additive to the spray tank and mix thoroughly.
  • Add Rygel ClearUp 840 Dri-Flo Herbicide and the remaining water. Mix thoroughly.
  • Add surfactant near the end of the filling process to minimize foaming.
  • Maintain adequate agitation during application and use the tank mix promptly.

TANK MIXTURES - HERBICIDES: ATRAZINE FLOWABLE, 2,4-D ester, dicamba, chlorsulfuron, simazine flowable, sulfometuron, pendimethalin, metsulfuron, triasulfuron, LVE MCPA, and oxyfluorfen.

  • The addition of oxyfluorfen at 75 mL/ha to recommended rates of Rygel ClearUp 840 Dri-Flo Herbicide prior to planting wheat or barley will improve knockdown and increase the speed at which treated weeds develop visible signs of phytotoxicity.