Cyclone 440 EC
- Manufacturer
- Imtrade
- Category
- Herbicides
- Registered until
- Registration expired
- Registration number
- 55185
- Active materials
- pendimethalin440 g/l
- hydrocarbon liquid499 g/l
- Links
- LabelView
GENERAL INSTRUCTIONS
CYCLONE 440EC HERBICIDE is a selective herbicide effective against most annual grasses and certain broadleaved weeds. It works by inhibiting seedling development and does not control established weeds. Follow these guidelines for optimal results:
-
Seedbed Preparation:
- Ensure seedbeds are free of weeds, trash, and clods during application.
- Avoid applying to soils with high organic matter (>6%).
-
Crop Injury and Staining:
- Crop injury may occur if CYCLONE 440EC HERBICIDE is applied to a poorly prepared seedbed or in cold, wet weather.
- Crops usually recover with improved weather conditions.
- The herbicide will stain (yellow) objects it contacts, so keep non-target items clear of the product and spray.
-
MIXING:
- Put half the required water volume in the spray tank and start agitation.
- When using CYCLONE 440EC HERBICIDE alone, add it to a partially filled tank, then complete filling with water. Mix thoroughly.
- For tank mixes, follow the label instructions of other products, adding CYCLONE 440EC HERBICIDE last.
-
APPLICATION METHOD
Ground Application:
- Use conventional sprayers with mechanical or by-pass agitation.
- Flat fan nozzles are recommended.
- Calibrate spray equipment for proper application.
- For tank mixtures, use nozzle screens no finer than 50 mesh.
- Apply the recommended quantity in 50-200 liters of water per hectare.
Aerial Application:
- Suitable for specific crops (pre-plant soybeans, cotton, etc.).
- Apply the recommended quantity in 25-60 liters of water per hectare.
- Calibrate equipment, use markers, and maintain an accurate swath width. Spray with a crosswind following recommended flying practices.
-
Incorporation:
- Thoroughly mix CYCLONE 440EC HERBICIDE with soil mechanically, by irrigation, or rainfall for even incorporation.
- Post-plant pre-emergence surface applications are effective with adequate rainfall or irrigation within 7-10 days. Light mechanical incorporation is needed if not.
- Maize is tolerant if the seed germinates below the treated band but intolerant if in direct contact with the seed.
-
Cereal Seed Dressings:
- Be cautious with fungicidal seed dressings that can affect emergence in CYCLONE 440EC HERBICIDE-treated areas. Ensure good seed depth control.
-
Weather Conditions for Planting:
- Crop injury may occur in prolonged cold, wet conditions during germination and emergence. Crops usually recover with improved weather.
-
FOLLOWING CROPS:
- Cultivate the soil to a depth of at least 15cm in case of crop failure.
- Replanting maize in the same year is possible if seedling depth is below the re-tilled area.
- Different crops can be sown after specific minimal intervals following CYCLONE 440EC HERBICIDE application.
-
COMPATIBILITY:
- CYCLONE 440EC HERBICIDE is physically compatible with various chemicals, including Atrazine, Diuron, Simazine, Glyphosate, etc.
RESISTANCE WARNING:
- CYCLONE 440EC HERBICIDE belongs to the dinitroaniline group (Group 3 Herbicide) with the inhibition of microtubule assembly mode of action.
- Weed resistance may exist due to genetic variability, and resistant weeds won't be controlled by CYCLONE 440EC HERBICIDE or other Group 3 Herbicides.
- Continuous use may lead to resistant weed dominance; monitor for resistance and use integrated weed management practices.
- Imtrade Australia Pty Ltd accepts no liability for losses resulting from the failure of CYCLONE 440EC HERBICIDE to control resistant weeds.
Registered for cultures | Rate |
---|---|
Cotton | 2.25 l |
Mung beans | 1.9 - 2.25 l |
Navy beans | 1.9 - 2.25 l |
Peanuts | 1.9 - 2.25 l |
Pigeon peas | 1.9 - 2.25 l |
Soybeans | 1.9 - 2.25 l |
Sunflowers | 1.9 - 2.25 l |
Spring barley | 0.9 l |
Winter barley | 0.9 l |
Winter wheat | 0.9 l |
Spring wheat | 0.9 l |