D-Ron 900 WGPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

General Instructions:

Before opening, carefully read DIRECTIONS FOR USE, PRECAUTIONARY STATEMENTS, SAFETY DIRECTIONS, and FIRST AID instructions.

Application should be made to moist soil before weeds emerge unless otherwise recommended. Sufficient moisture in the form of rain or irrigation is necessary after application to move the Chemical into the weed root zone. Add non-ionic surfactant where recommended. When spraying emerged weeds, best results are obtained when weeds are actively growing.

Thoroughly clean all traces of this product from application equipment immediately after use, otherwise injury to desirable vegetation may result when equipment is used again. Flush tank, pump, hose, and boom with several changes of water after removing nozzle tip and screens (clean these parts separately). Keep from contact with fertilizers, insecticides, fungicides, and seeds.

RESISTANT WEEDS WARNING

GROUP C HERBICIDE

KELPIE D-RON 900 WG HERBICIDE is a Group C Herbicide, a member of the Urea group of herbicides. KELPIE D-RON 900 WG HERBICIDE has the inhibitor of photosynthesis at photosystem II mode of action. For weed resistance management, KELPIE D-RON 900 WG HERBICIDE is a Group C herbicide.

Some naturally-occurring weed biotypes resistant to KELPIE D-RON 900 WG HERBICIDE and other Group C herbicides may exist through normal genetic variability in any weed population. The resistant individuals can eventually dominate the weed population if these herbicides are used repeatedly. These resistant weeds will not be controlled by KELPIE D-RON 900 WG HERBICIDE or other Group C herbicides.

However, resistance should not be assumed without first viewing the method of application, the coverage, and the timing of application. Resistance to KELPIE D-RON 900 WG HERBICIDE cannot be predicted and may occur at any time. It is not due to a fault in the product, and Sinochem International Australia Pty Ltd accepts no liability for any losses that may result from the failure of KELPIE D-RON 900 WG HERBICIDE to control resistant weeds.

MIXING

Part fill tank with CLEAN water (50%). Commence vigorous agitation. Add granules steadily. DO NOT dump. Ensure complete dispersion before filling to volume with water. Continue agitation during spraying. DO NOT leave spray solution in the tank overnight. Agitation: An efficient by-pass agitator or means of mechanical agitation should be employed when using this product.

COMPATIBILITY

This product is compatible with Diquat, Paraquat, Amitrole, KELPIE AMINE 625 HERBICIDE, 2,4-D Ester, 2,4-DB, MCPA, Chlorpyrifos, Omethoate, and Chlorsulfuron. Add the required amount of product when the spray tank containing KELPIE D-RON 900 WG HERBICIDE is nearly full and being continually agitated. This product is not compatible with Methabenzthiazuron, Dimethoate, Flamprop-m-Methyl, Diclofop-Methyl 375, and Triadimefon. As formulations of other manufacturers’ products are beyond the control of Sinochem International Australia Pty Ltd, all mixtures should be tested prior to mixing commercial quantities.

SELECTIVE USE IN CROPS

For selective use in crops, it is important to apply recommended rates correctly. KELPIE D-RON 900 WG HERBICIDE is most effective when applied to soil that has been well-tilled (clod-free) and is free of weeds and trash. Where not recommended for overall application, care should be taken to avoid spray drift onto fruit or foliage. Wetting agents should only be used where specified.

REPLANTING RESTRICTIONS

Crop Rotations – DO NOT replant treated areas to any crop within two years after the last spray unless otherwise stated. Cotton – DO NOT replant treated areas to any crop within 1 year after the last spray. Except cotton, corn, or grain sorghum which may be planted in the spring of the following year. Sugar Cane – Treated areas can be replanted to pineapple or sugar cane 1 year after the last spray.

CROP SAFETY

Heavy rains after application of this product may cause severe crop damage, risk must be assumed by the user. DO NOT use on sandy or gravelly soils or soils low in organic matter. Avoid contact of sprays with crop foliage or fruit.

PROTECTION OF CROPS, NATIVE AND OTHER NON-TARGET PLANTS

DO NOT apply under weather conditions, or from spraying equipment, that may cause spray to drift onto nearby susceptible plants/crops, cropping lands, or pastures.