EmazPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS

Emaz Herbicide is a pre-emergence herbicide used for controlling summer germinating grasses and broadleaved weeds in various applications, including fallow, sugarcane, and peanuts.

All Applications:

• Use correct nozzles and operating pressures to reduce the incidence of fines.
• Regularly replace worn or old nozzles and calibrate equipment.

Fallow Application:

• Apply in fallow prior to planting various crops, as specified in the Follow Crops table.
• Provides short-term (6 to 12 weeks) pre-emergence control.
• A green weed cover greater than 50% reduces pre-emergence weed control duration.

Sugarcane Application: Pre-emergence:

• Apply two days prior to incorporation.
• Incorporate with adequate irrigation or rainfall (minimum 5 cm depth).
• Apply before sugarcane emergence.
• In moist conditions, allow weeds to germinate before application. Mix with a knockdown herbicide if emerged weeds are present.

Post-emergence:

• Always mix with registered rates of paraquat.
• Apply as a carefully directed inter-row spray to weeds and the base of sugarcane stalks.
• Avoid spray contact with sugarcane foliage.
• DO NOT add crop oil. No other surfactant or adjuvant is required.

Peanut Application: Pre-emergence:

• Apply to soil and incorporate with adequate irrigation or rainfall (minimum 5 cm depth).

Post-emergence:

• Mix with an adjuvant as directed in the DIRECTIONS FOR USE section.

Soil Type:

• Pre-emergence weed control may be limited on soils with pH <5.0 and/or high concentrations of iron (Fe) and/or aluminum (Al), common in soil types like Krasnozems and red brown Ferrosols.

MIXING:

• Emaz Herbicide is an aqueous solution.
• Part fill the spray tank with water, add the product with the agitator running, and then fill the tank with water.
• When tank mixing, add other recommended compatible products first, mix thoroughly, and then add Emaz Herbicide.
• For post-emergence applications in peanuts, add adjuvant after adding Emaz Herbicide to the tank.
• No adjuvants or surfactants are required when used alone for pre-emergence weed control or with paraquat. DO NOT add crop oil when applied post-emergence with paraquat.

APPLICATION:

• DO NOT apply by aircraft.
• Fallow Application: Apply with boom equipment in not less than 50 L/ha water using flat fan nozzles. Avoid overlap and do not overspray headlands.
• Sugarcane: Ensure thorough coverage of soil and weeds. Apply in a minimum of 200 L water/ha using a nozzle configuration for either pre-emergence or post-emergence applications.
• Peanuts: Apply with boom equipment in not less than 50 L/ha water using flat fan nozzles. Avoid overlap and do not overspray headlands. For post-emergence applications, apply a minimum of 2 hours before rainfall.

EQUIPMENT CLEAN-UP:

• Thoroughly flush all spray equipment with water after using Emaz Herbicide and before using other products.

COMPATIBILITY:

• Emaz Herbicide is compatible with STOMP+, atrazine, glyphosate, paraquat, paraquat + diquat, Ally+, Garlon+, Touchdown+, and 2,4-D.
• NOT compatible with dicamba.