Finito LVE 570Plant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS

Before opening, carefully read Directions for Use, Precautionary Statements, Safety Directions, and First Aid Instructions. Weeds should be sprayed while actively growing and at their most susceptible stage. As a general guide, annuals should be sprayed when young, and perennials just prior to the appearance of the bud stage. Extremes of cold or drought are unfavorable. Ideal conditions include moist soil, fine weather, and no rain expected within 6 hours following application. Avoid spraying weeds outside the stages indicated in "Critical Comments" to prevent damage, loss of yield, or inadequate weed control. Avoid spraying in high winds.

APPLICATION/MIXING INFORMATION

This product mixes readily with water. Half fill the spray tank with clean water and add the required amount of product. Agitate thoroughly before adding the remainder of water.

• BOOM SPRAYING: Use 30-120 L/ha of water.

• AERIAL SPRAYING: Use 10-90 L/ha of water.

WEED TABLE: Specific Weed Control Recommendations

Use the rates given for the particular crop or situation indicated under the Directions of Use table. In most cases, this will provide control; however, some hard-to-kill weeds or those in advanced stages of growth may only be suppressed. The rates listed in the weeds table below are for use where weeds only are present, and crop or pasture is not involved. Use at these rates in a crop or pasture other than for spot spraying may cause damage.

EQUIPMENT MAINTENANCE AND USAGE

Equipment that has been used for this chemical should not be used for the application of other materials to sensitive plants unless it has been well washed out with Spraymate Tank & Equipment Cleaner followed by several clear water rinses.

COMPATIBILITY / TANK MIXES

This product can be mixed with various herbicides including Metsulfuron 600 WG Herbicide, Dicamba, Bromoxynil 200, Flowable Diuron, Flowable Terbutryn, Chlorsulfuron Glyphosate, Diclofop-Methyl 375 Selective Herbicide, Triasulfuron 750 WG Herbicide, Diflufenican-MCPA, Clopyralid, 2,2-DPA, and Fenoxaprop-Ethyl. When tank mixing, add the required amount of compatible product when the spray tank is nearly full and continuously agitate. If left overnight, agitate thoroughly before spraying. When mixing with Diclofop-Methyl 375 EC Selective Herbicide, add an approved Wetter 1000 surfactant and do not exceed 700 mL of RELYON LV MCPA 570 HERBICIDE per hectare. For consistent results, use a minimum of 80L water per ha by ground and 30L by air, and if wild oats are present, use 2L Diclofop-Methyl 375 EC Selective Herbicide per hectare.