Fiptron 200

For the control of various insect pests in bananas, brassicas, cotton, wine grapevines, potatoes, sugarcane.

MIXING
Bananas, Brassicas, Cotton, Wine Grapevines, Potatoes, Sugarcane Slowly add the required amount of product to water in the spray tank while stirring or agitating. Agitate while spraying.

APPLICATION
Bananas
Ensure thorough coverage of butts, suckers and surrounding trash and exposed soil.
Bananas (Band Spray)
Example calculations of the quantity of Fiptron 200 and the minimum water volume required to treat a 100 m row length of bananas for various band widths.
Brassicas
Ensure thorough coverage of foliage and heads.
Cotton
For ground application use a prepared spray volume of 35 – 75 L/ha depending on the size of the crop. For aerial application see ‘Aerial application’ instructions below.
Wine Grapevines
Fiptron 200 should be applied by hand held equipment as a high volume directed spray of approximately 500 mL of solution per vine directed to trunks and cordons during dormant period only.
Potatoes
Apply as a broadcast spray to the surface of the soil and incorporate to a depth of 15 cm prior to planting.

AERIAL APPLICATION
Use spray techniques that minimise off-target spray drift. DO NOT use rotary atomisers. Use application volumes between 20 L and 50 L/ha. Achieve a droplet density of ~60 droplets/cm2 on a flat surface on the target. When spraying large droplets (>250 μm), increase the application volume to >40 L/ha to ensure sufficient droplets are produced. Aerial application is not recommended for Brassica, potato crops and turf uses.