Flosul 800 g/L SCPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

General Instructions

Mixing:

• Shake the container well before use. Place half the water in the spray tank, add the required amount of Flosul while agitating, then add the remaining water to the correct level. Maintain agitation until spraying is completed. Adding Wetter 1000 at 0.1% of water volume is recommended to improve coverage, spray retention, and rain fastness. After spraying, clean all filters, spray lines, and the sprayer tank thoroughly. Flush the tank with clean water and pump through booms to clean all parts of the sprayer.

Tank Mixing Compatibility: Flosul is compatible with a wide range of other crop protection chemicals and micronutrients if vigorous agitation is maintained throughout mixing and spraying. When mixing with copper products, ensure Flosul is fully dispersed before adding copper. It is also compatible with dinocop 50% EC formulations and dimethoate formulations, provided the sulfur is added to the other diluted pesticide and agitation is maintained throughout the mixing and spraying operation. Do not mix with deltamethrin, DSM, mineral oils, and high nitrogen fertilizers.

Protection of Crops: Avoid spraying on cucumbers, rockmelons, apricots, raspberries, and other sulfur-sensitive plants. Reduce the dosage to avoid scorching during hot summer months.

Fungicide Resistance Warning: Flosul 800 g/L SC Fungicide and Miticide belong to Group M2 fungicides. Fungicide resistance management is essential to prevent the development of resistant fungi populations.

Precautions: Avoid application under extreme climate conditions such as rapid drying, extremely slow drying, frost, rain, or anticipated frost or rain.

Storage and Disposal: Store in a closed, original container in a well-ventilated area away from direct sunlight. Triple rinse containers before disposal. Do not dispose of undiluted chemicals on-site. Empty containers should be recycled or delivered to an approved waste management facility. Refillable containers should be emptied fully into application equipment and returned to the point of supply for refill or storage.

Spills Management: Hose small spillage away with a large excess of water. Large spillage should not be directed to drains. Absorb large spillage with sawdust or sand, and dispose of the absorbent material containing the product in a sealed container at an approved disposal site.

Protection of Wildlife, Fish, Crustaceans, and Environment: Avoid contaminating streams, rivers, or waterways with the product or used containers.