GENERAL INSTRUCTIONS
FUNGICIDE RESISTANCE WARNING
FARMALINX Flufol In-Furrow & Foliar Fungicide belongs to the DMI group of fungicides and is classified as a Group 3 fungicide for resistance management. Some naturally occurring fungi may be resistant to this product and other Group 3 fungicides due to genetic variability. Continuous use of these fungicides may allow resistant fungi to dominate, resulting in reduced efficacy and potential yield loss. Detection of resistant fungi is challenging, and FARMALINX Pty Ltd assumes no liability for losses due to failure in controlling resistant fungi. Resistance assessment requires a review of application methods, coverage, and timing.
APPLICATION
Fertilizer Application
Ensure treated fertilizer is dry before sowing. Treated fertilizer should be sown in the same furrow as the seed, not broadcast. Calibrate the seeder with treated material to deliver correct rates. DO NOT mix seed with treated fertilizer.
Foliar Application
Carefully check and monitor the rust development. Spray only if there is sufficient time in the season for rust to cause significant yield loss on the specific variety.
PROTECTION OF WILDLIFE, FISH, CRUSTACEANS, AND ENVIRONMENT
DO NOT contaminate streams, rivers, or waterways with the chemical or used containers.
STORAGE AND DISPOSAL
Store in the closed, original container in a cool, well-ventilated area. Avoid prolonged storage in direct sunlight. Refer to the label attached to the container for specific storage and disposal instructions based on the container type.
SAFETY DIRECTIONS
Harmful if Swallowed. Will irritate the eyes, nose, throat, and skin. Avoid contact with eyes and skin. DO NOT inhale vapor. When handling, wear cotton overalls, a washable hat, elbow-length PVC gloves, and a face shield or goggles. In case of contact with eyes, wash immediately with water. After use, wash hands, arms, and face thoroughly with soap and water. At the end of each day's use, wash gloves, face shield or goggles, and contaminated clothing.