Flumetsulam 800Plant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS

MIXING:

• Genfarm Flumetsulam 800 granules in water-soluble bags disperse in water, maintain agitation at all times, during mixing and spraying.
• Mix only enough spray solution for immediate use, avoid storage.

MIXING PROCEDURES:

1. For spray rigs with premix hoppers:

   • Three-quarter fill the hopper with water, have the rinsing sprinkler operating.
   • Add Genfarm Flumetsulam 800 water-soluble bags, transfer dissolved granules to the main tank.
   • Rinse the hopper until all product washes through.

2. For spray rigs with limited bypass agitation:

   • Pre-disperse Genfarm Flumetsulam 800 in a bucket before adding to the main tank.
   • Add Genfarm Flumetsulam 800 while stirring until granules disperse.

TANK MIXES:

1. Quarter fill the spray tank and agitate.
2. Add Genfarm Flumetsulam 800 following the mixing procedure.
3. Add Genfarm Haloxyfop 520 if used.
4. Half fill the tank.
5. Add wettable powders, dry flowables, suspension concentrates, soluble liquids, and/or emulsifiable concentrates.
6. Add Uptake® Spraying Oil when half full.
7. Add other adjuvants according to their labels.
8. Add water to fill the spray tank.

APPLICATION:

• Ground Application:
  • Apply Genfarm Flumetsulam 800 in 50 to 150 liters of water per hectare.
  • Use a calibrated sprayer delivering at least medium-quality spray.
  • DO NOT apply under conditions likely to cause drift onto waterways, susceptible crops, or land to be planted with susceptible crops.
  • Ideal conditions: warm, sunny days (>5ºC), applying more than 50 L/ha of total spray volume (preferably >75 L/ha) with maximum spray coverage.

COMPATIBILITY:

• Allow 7 days between application of a grass herbicide and Genfarm Flumetsulam 800 in chickpeas and field peas.
• In lentils, tank mixes may result in transient effects; stress conditions may lengthen recovery time.

CLEANING SPRAY EQUIPMENT:

1. After using Genfarm Flumetsulam 800, empty the tank and drain the system.
2. Thoroughly wash inside the tank using a pressure hose.
3. Drain the tank and clean filters in the tank, pump, lines, and nozzles.
4. To rinse, quarter-fill the tank with clean water and circulate through the system. Repeat twice.
5. To decontaminate before spraying sensitive crops, wash the tank and rinse the system.
6. Quarter-fill the tank, add an alkali detergent, circulate for 15 minutes, drain, and flush with clean water.
7. Rinse water should be discharged onto a designated disposal area or unused land away from desirable plants and watercourses. Chlorine-based cleaners are not recommended; Nufarm Tank and Equipment Cleaner is not recommended.