Impressor 600Plant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS:

Insecticide Resistance Warning:

• AC Impressor 600 Seed Dressing is a Group 4A insecticide.
• Insect resistance management is crucial due to the possibility of resistant insect biotypes.
• Resistant individuals may dominate the population with repeated use.
• Axichem Pty Limited accepts no liability for losses resulting from the failure of AC Impressor 600 Seed Dressing to control resistant insects.
• Specific resistance management strategies may apply; growers should consult local agricultural experts.

MIXING AND SEED TREATMENT:

Cotton:

• Shake container vigorously before pouring or pumping.
• Add water into the mixing vat, followed by flowable fungicides, coating agents, and AC Impressor 600 Seed Dressing.
• Stir until homogeneous, then add emulsifiable liquid fungicide slowly while stirring.
• Calibrate commercial seed dressing equipment for correct slurry seed dressing.
• Ensure the seed dressing mixture is applied to the maximum number of seeds.
• Store treated seed under cover in cool, dry conditions.
• Do not treat seed with poor viability.
• Do not store treated seed near foodstuffs or where it could be hazardous.

Forage, Seed Pasture, Canola, Lupin, Summer Crops:

• Shake container vigorously before pouring.
• Add the required quantity of AC Impressor 600 Seed Dressing to sufficient water.
• Mix with seed and rotate for even coverage.
• Apply the specified volume based on seed size.
• Store treated seed under cover in cool, dry conditions.
• Do not treat seed with poor viability.
• Do not store treated seed near foodstuffs or where it could be hazardous.

Cereal Crops:

• Shake container vigorously before pouring.
• Add the required quantity of AC Impressor 600 Seed Dressing to sufficient water for even coverage.
• The quantity of water used will vary based on equipment and seed quality.
• Stir regularly; ensure 120 mL (or 240 mL) of AC Impressor 600 Seed Dressing is applied per 100 kg of seed.
• Store treated seed under cover in cool, dry conditions.
• Do not treat seed with poor viability.
• Do not store treated seed near foodstuffs or where it could be hazardous.

SEED QUALITY:

• Do not use AC Impressor 600 Seed Dressing on seed with more than 12% moisture content or poor viability.
• Conduct a germination test on doubtful seed before treatment.
• The use of AC Impressor 600 Seed Dressing mixed with water has no effect on the storage life of treated sound seed.

STORAGE OF TREATED SEED:

• Do not store treated seed near foodstuffs or where it could be hazardous.
• Store treated seed in a dry, well-ventilated place.
• High moisture combined with high temperatures during storage may affect subsequent germination.

COMPATIBILITY:

• Compatible with Baytan C Flowable Seed Dressing and Raxil C Flowable Seed Dressing for cereal seeds.
• Do not exceed 600 mL of total mixture per 100 kg seed.
• Compatible with Jockey Systemic Seed Fungicide and Semevin P Seed Dressing Insecticide.

PROTECTION OF LIVESTOCK:

• Seed treated with AC Impressor 600 Seed Dressing must not be used for animal consumption or mixed with animal feed.
• Do not allow treated seed to contaminate seed intended for animal consumption.

PROTECTION OF WILDLIFE, FISH, CRUSTACEANS, AND ENVIRONMENT:

• Avoid contamination of ponds, waterways, and drains.
• Do not allow treated seed or containers to be accessible to birds or wildlife.
• Clean up any spillages of treated seed immediately.

PRECAUTIONS:

• Keep stored treated seed separate from other grain.
• Clearly mark bags or containers to indicate treated contents.
• Do not allow treated seed to contaminate seed intended for human consumption.
• Do not use treated seed for human consumption.
• Do not use bags that held treated seed for other purposes.

STORAGE AND DISPOSAL:

• Store the product in the closed, original container in a cool, well-ventilated area.
• Rinse containers before disposal and add rinsings to the spray tank.
• Do not dispose of undiluted chemicals on-site.
• Dispose of at a local authority landfill or bury the container below 500 mm in a disposal pit.
• Do not burn empty containers and products.