Intake Hiload GoldPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

For control of certain fungal diseases on wheat, barley and canola when mixed with fertiliser or applied as a foliar spray.

GENERAL INSTRUCTIONS

Fertiliser Application
Granulated Fertiliser
To determine the correct volume of INTAKE HILOAD GOLD required to be applied to the fertiliser, refer to the Critical Comments in the Directions for Use table which provides a guide based on a range of common fertiliser application rates. Ensure that treated fertiliser is dry before sowing with the crop. Treated fertiliser should be applied in a band 3-4cm below or to the side of seed in the planting furrow. It should not be broadcast. Note that the flow rate of fertiliser may be changed after treatment, and the seeder should be calibrated with the treated material to ensure that the correct rates of fertiliser and fungicide are delivered. Do not mix seed with treated fertiliser.

Liquid Fertiliser
Premixing of INTAKE HILOAD GOLD with water is recommended. A mixing ratio of 2:1 to 4:1 parts water to INTAKE HILOAD GOLD is preferred. Add the required volume of INTAKE HILOAD GOLD premix with the liquid fertiliser in a mixing tank as recommended in the table in the critical comments of the DIRECTIONS FOR USE table. The mixture should be applied at planting as soon as possible after mixing with continual agitation in the tank. The mixture should be injected in the planting furrow 3-4cm below or to the side of the seed. Do not apply as a broadcast spray. Do not mix seed with the premix of liquid fertiliser and INTAKE HILOAD GOLD.

Foliar Application
Check the crop carefully and regularly. Spray only if there is sufficient time in the season for the rust to develop to a level on the variety in question when it will cause significant yield loss.

Compatibility
INTAKE HILOAD GOLD is compatible with the liquid fertilizers – Flexi N , Flexi NK , Flexi NS , Easy N and UAN. Agitation of the liquid fertilizer prior to and during addition of INTAKE HILOAD GOLD is required. Maintain agitation of the mix during application.