Ken-Trel 750 SGPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS:

MIXING:

1. Measure the required quantity of Ken-Trel 750 SG granules using scales.
2. The granules are highly soluble and dissolve rapidly in fast-moving water.
3. Maintain agitation at all times during mixing and spraying.

SPRAY RIGS THAT TOPFILL:

• Quarter fill the tank, add Ken-Trel 750 SG one bag at a time while filling, directing water onto the soluble bags.

SPRAY RIGS WITH PREMIX HOPPERS:

• Three-quarter fill the hopper with water, add Ken-Trel 750 SG, transfer the dissolved mix into the main tank, and rinse the hopper.

SPRAY RIGS WITH LIMITED BYPASS AGITATION:

• Predissolve Ken-Trel 750 SG in a bucket before adding to the main tank. Add while stirring until granules dissolve.

TANK-MIXES:

1. Quarter fill the spray tank with agitation.
2. Add Ken-Trel 750 SG.
3. Add other components in a specific order as outlined.
4. Only mix enough solution for immediate use.

COMPATIBILITY:

• Ken-Trel 750 SG is compatible with various broadleaf and grass herbicides, adjuvants, and oils/wetters. Follow specific instructions for tank-mixes.

APPLICATION - BOOM SPRAYING CROP AND PASTURES:

• Apply with an accurately calibrated ground rig or aircraft, delivering 200 to 300 micron droplets.
• Ground Application: Not less than 50 L/ha water volume for boom sprayers.
• Aerial Application: Not less than 20 L/ha water volume.
• Adjust spray volumes for specific weeds like hardhead thistle or silver wattle.

HIGH VOLUME HAND GUN:

• Apply recommended mix for full coverage through a No. 6-8 tip at 700 to 1500 kPa.
• Adjust spray volume based on weed density.

STEM INJECTION:

• Use a ¾ length axe to create an injection pocket at waist height.
• Apply chemical immediately with a calibrated vaccinator.

CLEANING SPRAY EQUIPMENT:

• Rinse water should be discharged to a designated disposal area.
• Partial Cleaning: Rinse and circulate with clean water twice.
• Complete Cleaning: Rinse, circulate with alkali detergent, drain, clean filters and nozzles separately.

RESISTANT WEEDS WARNING:

• Ken-Trel 750 SG is a Group I herbicide with a disrupter of plant cell growth mode of action.
• Weed resistance management is crucial, and resistant weeds may not be controlled by this herbicide.
• Strategies to minimize resistance are available.

PROTECTION OF CROPS, NATIVE, AND OTHER NON-TARGET PLANTS:

• Avoid spray drift onto nearby susceptible plants, crops, or pastures.
• Susceptible crops include chickpeas, cotton, faba beans, field peas, fruit trees, lentils, lupins, lucerne, medics, ornamentals, potatoes, safflower, sub-clover, tomatoes, vegetables, grape and kiwifruit vines, wattles, and white clover.
• Do not apply to crops or pastures intended for compost or mulches for use with susceptible crops.

PROTECTION OF LIVESTOCK:

• No specific information provided. Follow relevant guidelines and withholding periods.

PROTECTION OF WILDLIFE, FISH, CRUSTACEANS, AND ENVIRONMENT:

• No specific hazards mentioned. Avoid contamination of water bodies.

STORAGE AND DISPOSAL:

• Store in a dry, cool, well-ventilated area away from direct sunlight.
• Triple-rinse containers before disposal. Follow recycling guidelines.
• Discharge rinse water to a designated disposal area.
• Dispose of undiluted chemicals according to waste management regulations. Do not burn empty containers or product.