Metsun 600
- Manufacturer
- Grow Choice
- Category
- Herbicides
- Registered until
- 2025-06-29
- Registration number
- 53471
- Active materials
- metsulfuron-methyl600 g/kg
GENERAL INSTRUCTIONS - BRUSH APPLICATIONS - CONTINUED:
APPLICATION CONSIDERATIONS:
-
Best Results Conditions:
- Apply to actively growing plants not stressed by factors like dry weather or waterlogging.
- Thoroughly cover plants for maximum herbicide uptake.
-
Regrowth and Retreatment:
- Regrowth may occur if applied during stress or incomplete coverage.
- Retreatment at recommended rates for regrowth, especially for blackberries (wait until at least 1 meter tall).
- A 2-year interval is advised if plants were previously treated with other herbicides or subjected to burning or slashing.
-
Avoidance of Mature Blackberries:
- Avoid applying to bushes bearing mature blackberries intended for food use.
APPLICATION EQUIPMENT:
-
Handgun:
- Ensure complete and uniform coverage.
- Use appropriate nozzle sizes and pressures based on plant size.
- For blackberry regrowth, use a large spray nozzle with a wide cone setting for even coverage.
-
Boom Spray:
- Calibrate the boom for constant speed and uniform spray pattern.
- Fan nozzles at 240-280 kPa recommended.
- Adjust boom height for proper spray overlap.
- Apply a minimum of 150L prepared spray per hectare; increase for dense stands.
-
Gas Gun:
- Ensure thorough coverage; use dye for visibility.
- High-pressure settings for penetration.
- Organosilicone penetrant recommended for Metsun 600 + Bio Choice 360.
-
Aerial Application (Helicopter Only):
- Calibrate helicopter for half overlap opposite pass technique.
- Apply minimum 100L/ha for blackberries, 60L/ha for Mimosa pigra, up to 200L/ha.
- Use a VMD of 300 microns.
- Higher water volumes for large bushes or steep terrain.
- Avoid spraying in unfavorable conditions.
TANK MIXES:
- Tank mix with BioChoice 360 for improved weed control in specific situations, following the directions for use table.
USE OF SURFACTANT/WETTING AGENT:
-
Metsun 600 alone: Use a surfactant wetting agent ALWAYS. If not specified, use a non-ionic surfactant at 100mL/100L final spray volume.
-
Metsun 600 + Glyphosate: Use a non-ionic surfactant; an organosilicone penetrant (e.g., Pulse1) may be recommended in some tank mix situations.
-
Gas Gun Applications: Add an organosilicone penetrant (e.g., Pulse1) at the specified rate.
COMPATIBILITY:
- Compatible with glyphosate formulations like BioChoice 360 Herbicide and Distribution 450 Herbicide.
SPRAY PREPARATION:
- Partially fill the spray tank with water.
- With agitation engaged, add the required Metsun 600 amount.
- Add the remaining water and maintain agitation.
- Re-agitate if the spray solution stands.
CROP ROTATION RECOMMENDATIONS:
- Many crop species are sensitive to metsulfuron methyl. Breakdown factors include soil pH, moisture, and temperature. Legumes will be removed from pasture if oversprayed. Sensitive species listed in the instructions.
- Plant a small test area to check for herbicide breakdown before sowing the entire area treated with Metsun 600.
Registered for cultures |
---|
Pasture |
Spring barley |
Winter barley |
Winter triticale |
Spring triticale |
Winter wheat |
Spring wheat |