Mitra 200 EC/ULVPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS:

Mitra 200 EC/ULV must always be mixed with the registered rate of a compatible larvicide. The product can be used directly from the container in a ULV application or in a water-based lowvolume EC application

APPLICATION
Mitra 200 EC/ULV must only be applied as a ULV by aircraft fitted with accurately calibrated ULV equipment eg. Micronair AU5000 atomisers. To minimise drift it is essential to produce a suitable spray droplet diameter (volume mean diameter) by controlling the rotational speed of the atomisers. It is recommended that the application parameters in terms of plane speed and blade angle settings are adjusted to deliver a maximum rotational speed of 3000 rpm and a resultant droplet diameter of approximately 100 microns. Rotational speed of the atomisers can be measured by the fitment and maintenance of transducers. Thorough coverage is essential.
DO NOT add water – use direct from the container.
Note: Insect control could be diminished if rain falls within 6 hours of application.

APPLICATION
Accurate placement and good foliar coverage are essential. Apply in a minimum total volume of 20L/ha by air, or 80L/ha by ground rig.
Note: Insect control could be diminished if rain falls within 6 hours of application