MulliganPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS - MULIGAN IGR

Mode of Action: MULIGAN IGR suppresses embryogenesis in insect eggs and inhibits metamorphosis and adult emergence of target insects. It does not affect adult insects, but hatching of eggs laid by treated adults will be suppressed. Activity is slower compared to contact insecticides due to its dependence on insect development.

Mixing: Partly fill the spray tank with water. Measure the required amount of MULIGAN IGR and add it to the partly filled spray tank. Add the remaining water required.

Application - Cotton: Ensure thorough coverage. For ground rig boom spray, apply in 100-150 L water/ha. Aerial application is acceptable when ground access is restricted, using 20-30 L water/ha. Apply when industry-recommended thresholds of silverleaf whitefly (SLW) are exceeded. Limit to two applications per crop, with a minimum re-treatment interval of 14 days. Use as part of a SLW management strategy with other approved chemistry for SLW, avoiding consecutive applications.

Application - Rockmelon, Tomato, and Capsicum: Ensure thorough coverage. For ground rig foliar spray, apply in 100-150 L water/ha. Use 500-1000 L water/ha for high volume dense crops. If applying over 1000 L/ha, use a rate of 50 mL/100L water. Apply at the first appearance of whitefly. Limit to two applications per crop, with a minimum re-treatment interval of 14 days. Use as part of a SLW management strategy with other approved chemistry for SLW, avoiding consecutive applications.

Application - Citrus and Olives: Apply in sufficient water for thorough coverage. For young trees, use approximately 1000L/ha. DO NOT apply in less than 1000 L/ha to bearing trees.

Cleaning Spray Equipment: After using MULIGAN IGR, empty the tank and drain the system completely. Rinse the tank, pump, lines, hoses, filters, and nozzles by circulating clean water through the system. Repeat the rinsing procedure twice.

Always adhere to recommended application rates, intervals, and industry best practices for effective pest management and environmental protection.