NOKO 850 WGPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS

NOKO 850 WG is a residual, soil applied, pre-emergent herbicide. It is absorbed by the roots and to a lesser extent by the shoots of germinating weeds, and works by inhibiting growth in the meristematic area. Weed control is optimized when NOKO 850 WG is applied evenly to moist soil just prior to incorporation by sowing and there is sufficient rainfall soon after sowing to ensure uptake of the herbicide by germinating weeds. Weed control may be greatly reduced where weed seeds have been buried by cultivation prior to application. Weed control may also be reduced where there is insufficient soil moisture for herbicide uptake or in soils prone to leaching where rainfall is sufficiently heavy to cause movement of the herbicide out of the weed seed zone. NOKO 850 WG will not reliably control emerged weeds. A knockdown herbicide should be used to control emerged weeds at sowing.

Crop Safety

NOKO 850 WG generally shows good crop selectivity when used as directed. The following directions will help minimize the risk of crop effects:

• DO NOT plant Durum Wheat after the application of NOKO 850 WG as it may be severely damaged. Refer to Crop Rotation Recommendations for further advice.

• When incorporation is by sowing with knife points and press wheels avoid throwing treated soil into adjacent crop rows.

• DO NOT use a combination of both press wheels and a covering device such as harrows or chains when sowing.

The potential for crop damage is increased when there is substantial rainfall after the application of NOKO 850 WG, especially where this leads to temporary waterlogging. Situations which lead to concentration of herbicide in the planting row, or movement of herbicide to the depth of the crop seed, may also increase the potential for crop damage. This includes the following scenarios:

• Where deep furrows are formed by the sowing operation, soil movement into the crop row may occur due to wind or heavy rainfall soon after sowing resulting in concentration of herbicide in the crop row.

• Where soil has a high potential for leaching, heavy rainfall between application and crop emergence may result in movement of herbicide into the crop seed zone.

Other circumstances which may increase the potential for crop damage include where NOKO 850 WG is applied in tank mixes with other herbicides, where crop vigor is reduced due to factors such as frosts, insect attack or crop disease, when weather damaged seed is used and/or with the use of some fungicide seed treatments especially in conjunction with crop varieties with short coleoptile length. A combination of individual factors which increase the potential for crop damage may increase the extent of crop damage.

Chickpeas, Field Peas, Lentils and Lupins:

NOKO 850 WG may occasionally delay emergence or flowering of winter legume crops. Luxor variety of Albus Lupin has been identified as potentially more sensitive to NOKO 850 WG than other Lupin varieties, particularly in situations of late sowing and/or wet conditions around the time of sowing.

Incorporation by Sowing

NOKO 850 WG should be applied prior to sowing, and incorporated by sowing using knife points and press wheels, or narrow points and harrows. When incorporation is by knife points and press wheels, weeds germinating in the seed row may not be controlled. Weeds germinating from depth, weeds just about to emerge, or weeds that have emerged which are not controlled by a knockdown herbicide at sowing may not be controlled by NOKO 850 WG.

Interval between Application and Sowing

Incorporate by sowing as soon as practicable after the application of NOKO 850 WG, but no later than 3 days after application.

Sandy Soils

Weed control may be reduced in soil prone to leaching where rainfall after application and sowing is sufficiently heavy to cause movement of the herbicide out of the weed seed zone.

Suppression of Great Brome and Wild Oat

NOKO 850 WG is most effective when grass weed seeds are present on or very close to the soil surface at the time of application. For this reason, it is recommended that NOKO 850 WG is applied to uncultivated soil. As the depth of weed seeds increases, control from NOKO 850 WG tends to decrease. It is rare that all Great Brome and Wild Oat weed seeds will be on the soil surface at the time of NOKO 850 WG application, especially considering that these seeds may remain viable in the soil for several seasons. Plants may germinate from seeds buried by the sowing operation in previous seasons, by livestock or by weed seed self-burial mechanisms particularly in some soil types (e.g. cracking clays and sand). Therefore only partial control or suppression of the Great Brome or Wild Oat population should generally be expected. In these situations, a follow-up application with a suitable post-emergent herbicide may be required to control remaining plants.

Mixing

Ensure sprayer and nozzle filters are clean before preparing the spray mixture. Half fill the spray tank with water and, with the agitators in motion, add the correct amount of NOKO 850 WG directly to the spray tank. Complete filling the tank with agitators in motion. Agitation must continue before and during spraying. When other products are to be applied in addition to NOKO 850 WG, always add NOKO 850 WG to the spray tank first and ensure it is fully dispersed in the spray tank before addition other products.

Application

Ensure complete coverage and even spray coverage of the soil is achieved. Poor spray coverage may result from application to ridged or excessively cloddy soil or in situations of high stubble, plant residue or other ground cover. A significant reduction in weed control may result where stubble, plant residue or other ground cover exceeds 50%, and in situations where a ‘cold’ or incomplete burn of stubble results in a mass of material which can act as a physical barrier between the herbicide and germinating weeds – this can be exacerbated in header trails where there may be greater weed seed numbers and higher levels of plant residue. Weed control can be particularly affected where NOKO 850 WG is applied to a barrier of stubble, plant residue or other ground cover and there is insufficient following rainfall to transfer NOKO 850 WG to the soil surface and the germinating weed seeds.

Equipment

Ground Sprayers – Standard boom sprayers only are recommended and must be fitted with by-pass or mechanical agitation. It is recommended that 50 to 100L water/ha is applied with spray droplets of a COARSE droplet size category. In some situations (e.g. high stubble loads) high water volumes may give higher levels of weed control.

Aircraft – DO NOT apply NOKO 850 WG by aircraft.

Sprayer clean-up

Following the use of NOKO 850 WG, the spraying equipment should be thoroughly cleaned before it is used for application of other products.

Cleaning should occur immediately following application of NOKO 850 WG. The spray unit should first be completely emptied. The sprayer, including all filters and lines, should be thoroughly rinsed with water, to remove all traces of product.

Ensure that the sprayer clean-up is carried out in an area that is clear of waterways, desirable vegetation and tree roots. If using NOKO 850 WG with a tank-mix partner, refer to the sprayer clean-up instructions for the other product, which may be more rigorous than those for NOKO 850 WG.

Crop Rotation Recommendations

NOKO 850 WG breaks down by microbial degradation, which is favored by warm, moist aerobic soil. Minimum re-cropping intervals (months after NOKO 850 WG application) have been established for NOKO 850 WG to minimize the risk of damage to following crops (see table below). However, environmental and agronomic factors make it impossible to eliminate all risk and therefore the potential for damage to following crops exists.

Rainfall of less than the minimum interim rainfall required (see table below) may result in extended planting of the particular following crop. For re-cropping with Winter crops, where a minimum of 250mm of interim rainfall is required, if rain from application to end of Spring is less than 125mm and isolated heavy Summer and Autumn falls and break rains are required to achieve the 250mm interim rainfall, then extended re-cropping intervals may apply.