Picloram + MCPA 242Plant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS

MINIMUM RECROPPING PERIODS: Picloram, an active constituent in this product, remains active in the soil for extended periods depending on various factors. Plantback periods for rotational crops following the application of TITAN MCPA + Picloram 242 Herbicide on black cracking clay soils are outlined below. These periods are based on a normal rainfall pattern. During drought conditions, the plantback period may be significantly longer.

Northern New South Wales and QueenslandWinter Crop Plantback Period (Months)Summer Crop Plantback Period (Months)Wheat2SorghumBarley2CottonCanola4MungbeanChickpea6SoybeanFaba Bean4Lucerne9

Western Australia and other soil types not mentioned above: DO NOT plant susceptible broadleaf crops within 12 months of applying the product. Cereal crops and grasses can be sown safely after using TITAN MCPA + Picloram 242 Herbicide in crop weed control.

MIXING: TITAN MCPA + Picloram 242 Herbicide can be mixed with water only. Mix only sufficient chemical for each day's use and avoid storing the mix. Half fill the spray tank with water and add the required quantity of TITAN MCPA + Picloram 242 Herbicide, then complete filling. Agitate continuously to ensure thorough mixing before and during application.

COMPATIBILITY: TITAN MCPA + Picloram 242 Herbicide is compatible with various herbicides, adjuvants, and insecticides. Ensure to read and follow all label directions, restraints, plantback periods, withholding periods, and safety directions on the partner label as well as those on the TITAN MCPA + Picloram 242 Herbicide label.

APPLICATION METHODS: A. Ground Application (Boom): Apply with an accurately calibrated boom sprayer in at least 50L/ha water. Set the boom at a height to ensure a double overlap of the nozzle pattern.

B. Aerial Application: Apply in a minimum volume of 35L/ha water. Use calibrated equipment and avoid applying with smaller than medium to coarse spray droplets.

Ensure not to apply by aircraft unless wind speed is more than 3km/hr and less than 15km/hr as measured at the application site and/or the air temperature is above 30°C, or when the wind is blowing toward susceptible crops.

CLEANING SPRAY EQUIPMENT: After using TITAN MCPA + Picloram 242 Herbicide, rinse the equipment thoroughly. Rinse water should be discharged onto a designated disposal area. Use an alkali detergent for decontamination before spraying cotton and other sensitive crops.