Touchdown 360

Manufacturer
SYNGENTA
Category
Herbicides
Registered until
2024-06-29
Registration number
62984
Active materials
Links


GENERAL INSTRUCTIONS

TOUCHDOWN 360 is a non-volatile, water-soluble liquid product with non-selective herbicidal activity against many annual and perennial broadleaf weeds and grasses. It may be used for weed control in agricultural land prior to sowing any edible or non-edible crop, except prior to transplanting tomato seedlings.

Mode of Action: TOUCHDOWN 360 is absorbed by plant foliage and green stems. It is inactivated immediately in the soil and does not provide residual weed control. It moves through the plant from the point of contact to and into the root system. Visible effects on annual weeds take 3 to 7 days, while on perennial weeds, effects may not be obvious for 2 to 3 weeks or longer in some cases.

Mixing: TOUCHDOWN 360 mixes readily with water. Reduced results may occur if water containing soil is used or if hard water containing calcium salts is used. Ensure the spray tank is free of any residue of previous spray materials. Use spray solutions promptly and within 5 days, as gradual loss of activity may occur.

  1. Fill the spray tank with half the required amount of clean water and add TOUCHDOWN 360. Mix well before adding the remaining water.

  2. Prevent excessive foaming by placing the filling hose below the surface of the spray solution and removing it immediately after filling.

  3. Avoid using mechanical agitators as they may cause excessive foaming.

  4. DO NOT mix, store, or apply this product in galvanized steel or unlined steel containers or spray tanks, as it may lead to the formation of a highly flammable gas mixture.

Tank Mixing: Follow these steps for tank mixing:

  1. Fill the spray tank with water and start agitation.

  2. Add crystalline ammonium sulphate if recommended, wash 2% w/v (2 kg/ 100 L spray solution) through a top mesh screen into the tank, and mix thoroughly.

  3. Add recommended herbicide/insecticide/additive and mix thoroughly.

  4. Add TOUCHDOWN 360 and remaining water. Mix thoroughly.

  5. Add surfactant if required near the end of the filling process to minimize foaming.

  6. Maintain adequate agitation during application and use the tank mix promptly.

Compatibility: TOUCHDOWN 360 may be tank mixed with various herbicides, insecticides, and additives. Read and follow all label directions, restraints, plant back periods, withholding periods, regional use restrictions, and safety directions for the tank mix products.

Application:

  • Use recommended rates of TOUCHDOWN 360 in 25 to 200 L of clean water per hectare.

  • Adjust equipment to achieve an even spray pattern and ensure complete and uniform wetting of all foliage.

  • Avoid contact with desirable vegetation.

  • After use, clean all equipment thoroughly by washing with water.

Wiper Equipment: Wiper equipment may be used to apply TOUCHDOWN 360 on weeds growing in specified crops and non-crop areas.

  • Operate wiper equipment a minimum of 10 cm above the crop or pasture.

  • Weeds should be at least 15 cm above the crop or pasture at the time of application.

  • Mix only enough herbicide solution for immediate requirements and DO NOT store mixed solution for more than a few days.

  • Flush out equipment with water after use.

Rate: Mix 1 L TOUCHDOWN 360 with 2 L clean water to prepare a 33% solution. See specific use recommendations in the Weeds Controlled tables.