Bio-Ceres G WBPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

DIRECTIONS FOR USE

Begin treatment of crops at the first appearance of the insect pest. Application rates, frequency, spray coverage and insect numbers impact the speed at which acceptable control is achieved.
Bio-Ceres GWB is most effective when used early, before high insect populations develop. It takes 5-7 days after the first application to observe control. Reapply as necessary.
Multiple applications may be required to reduce numbers of target pests.

MIXING INSTRUCTIONS Use freshly prepared spray solution each time. Do not mix with fungicide.
If a fungicide must be used, make the application of the fungicide at least 4 days before the BIO-CERES
G WB application or at least 2 days after the BIO-CERES G WB application.
This product may be applied with conventional hand-held, and/or ground spray equipment.

APPLICATION RATE AND INSTRUCTIONS

Apply 2-4g/L of water depending on insect population density. It is recommended to add a small amount of clean water to the tank or sprayer before adding BIO-CERES G WB to avoid settling.
Agitate constantly to maintain suspension of the solution. Use spray volume sufficient to cover foliage infested with insect pests. Crop size and spray equipment will determine amount of water needed.
Depending on crop treated 500 to 1000 L of spray volume will typically be required for 1ha.

APPLICATION FREQUENCY AND TIMING
Reapply within a 7 day interval. In case of pest outbreak, the product can be used every 3-5 days.
Multiple applications may be required to reduce numbers of target pests. There is no limit on number of applications. Mix well before application. An emulsifying agent can be added.

PRE-HARVEST INTERVALS
Pre-harvest interval for BIO-CERES G WB is zero (0) days and it can be applied up to the day of harvest.