BIOTECH I Industrial Microbiocide
DIRECTIONS FOR USE
DO NOT discharge effluent containing this product into sewer systems, lakes, streams, ponds, estuaries, oceans, andother waters. DO NOT contaminate irrigation or drinking water supplies or aquatic habitats by cleaning of equipment or disposal of wastes.
Cooling Tower Systems: Prior to use in water cooling towers, systems should be cleaned to remove organic, inorganic, and microbiological deposits. An initial slug addition of 280 to 700 mL per 10,000 litres of water should then be added to the sump of the cooling water towers. Repeat the initial dosage until control is evident. Subsequent slug additions of 80 to 700 mL per 10,000 litres of water should be added every 2 to 5 days or as needed. The frequency of addition will depend on the relative amount of bleedoff and the severity of the microbiological problem.
Industrial Air Washing Systems: Prior to use in air washers, systems should be cleaned to remove organic, inorganic, and microbiological deposits. An initial slug addition of 100 to 160 mL per 1000 litres of water should then be added to the sump or the water collector trays. Repeat the initial dosage until control is evident. Subsequent slug additions of 70 to 160 mL per 1000 litres of water should be added every 1 to 5 days or as needed. The frequency of addition will depend on the relative amount of bleedoff and the severity of the microbiological problem. For use only in systems equipped with effective mist eliminating components.