Bonzi
- Manufacturer
- SYNGENTA
- Category
- Growth regulators
- Registered until
- 2026-12-31
- Registration number
- 25453
- Active materials
- paclobutrazol4 g/l
- Links
- LabelView
For Use on Container Grown Ornamental Bedding Plants and Plugs
STORAGE
Store product in a cool, dry, well ventilated area away from food and feed, and out of reach of children and animals. Keep product from freezing.
DECONTAMINATION AND DISPOSAL
For information on disposal of unused, unwanted product, contact the manufacturer or the provincial regulatory agency. Contact the manufacturer and the provincial regulatory agency in case of a spill, and for clean up of spills.
CONTAINER DISPOSAL:
FOR DISPOSAL OF PLASTIC JUGS:
Do not reuse this container for any purpose. This is a recyclable container, and is to be disposed of at a container collection site. Contact your local distributor/dealer or municipality for the location of the nearest collection site. Before taking the container to the collection site:
1. Triple- or pressure-rinse the empty container. Add the rinsings to the spray mixture in the tank.
2. Make the empty, rinsed container unsuitable for further use.
If there is no container collection site in your area, dispose of the container in accordance with provincial requirements.
FOR REFILLABLE CONTAINERS:
For disposal, this container may be returned to the point of purchase (distributor/dealer). It must be refilled by the distributor/dealer with the same product. Do not use this container for any other purpose.
If the container is not being refilled, refer to the section "FOR DISPOSAL OF PLASTIC JUGS".
PRODUCT INFORMATION
BONZI Plant Growth Regulator is a plant growth regulator for greenhouse use on ornamental bedding plants and plugs. When applied by foliar spray or into the soil, it is translocated to growing terminals and reduces internode elongation resulting in more desirable compact plants.
DIRECTIONS FOR USE
BONZI Plant Growth Regulator is a plant growth regulator for use in greenhouses for annual bedding plants grown in containers such as plug trays, cell packs in flats and small pots. Desired height control is usually obtained with a single BONZI Plant Growth Regulator foliar spray or drench application but good height control can also be accomplished by repeated application 7-10 days apart using BONZI Plant Growth Regulator at one-half the recommended concentration.
BONZI Plant Growth Regulator users should note that height control may vary with different cultivars. Short slow growing types require a lower rate than fast growing types. When used as directed, BONZI Plant Growth Regulator produces no toxic effects. Overly stunted plants or leaf burn may result from excessively high application rates.
WARNING: Be sure of your calculations, volume measurements and sprayer calibration. When in doubt recalculate. Frequent agitation of the spray mixture is essential.
DO NOT contaminate irrigation or drinking water supplies or aquatic habitats by cleaning of equipment or disposal of wastes.
DO NOT allow effluent or runoff from greenhouses containing this product to enter lakes, streams, ponds or other waters.