Curzate 60 DFPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

FOR SALE FOR USE ON POTATOES IN CANADA ONLY
Do not mix and apply more than 38 kg of CURZATE 60 DF Fungicide per day for ground application (enough to treat 170 hectares).

STORAGE
Store product in original container in a secure, dry area away from food or feed. Protect against humid air and water. Not for use or storage in or around the home. Keep container tightly closed.

DISPOSAL
1. Triple- or pressure- rinse the empty container. Add the rinsings to the spray mixture in the tank.
2. Follow provincial instruction for any required additional cleaning of the container prior to its disposal.
3. Make the empty container unsuitable for further use.
4. Dispose of the container in accordance with provincial requirements.
5. For information on the disposal of unused, unwanted product, contact the manufacturer or the provincial regulatory agency. Contact the manufacturer and the provincial regulatory agency in case of a spill and for clean-up of spills

DIRECTIONS FOR USE
GENERAL INFORMATION
CURZATE 60 DF Fungicide is an agricultural fungicide and should only be used in accordance with the recommendations on this label or in separate DuPont Agricultural Bulletins.
CURZATE 60 DF Fungicide is formulated as a dry flowable granule to be mixed in water and applied as a uniform broadcast spray.
CURZATE 60 DF Fungicide is a highly active, locally systemic fungicide recommended for the control of Late Blight (Phytophthora infestans) on potatoes.

USE CURZATE 60 DF FUNGICIDE ONLY IN A TANKMIX WITH MANZATE DF Fungicide or MANZATE Pro-Stick Fungicide. Do not use CURZATE 60 DF Fungicide alone. Read and follow all precautions listed on the MANZATE DF Fungicide or MANZATE Pro-Stick Fungicide label.
Initial applications should start when local conditions indicate that Late Blight is imminent: make additional applications at 5-7 day intervals, however at least 20 days must pass between the 2nd and 3rd application. If disease conditions are present during this 20 day period, a fungicide other than CURZATE 60 DF Fungicide must be used to protect the crop during this period.
Apply no more than 4 applications per crop. Do not apply within 8 days of harvest.
Utilize sufficient water to obtain thorough coverage: 200 - 1000 L/ha by ground application.
Do not mix and apply more than 38 kg of CURZATE 60 DF Fungicide per day for ground application (enough to treat 170 hectares).

TANKMIX FOR AERIAL APPLICATION ON POTATOES
For control of late blight in potatoes use a tankmix of 225 g/ha CURZATE 60 DF Fungicide
+ 1.35-1.6 kg/ha MANZATE Pro-Stick or MANZATE DF Fungicide.
The higher MANZATE Pro-Stick fungicide rate (1.6 kg/ha) is to be used under conditions of high disease pressures.
Apply by air with a minimum water volume of 50 L/ha
Initial applications should start when local conditions indicate that Late Blight is imminent: make additional applications at 5-7 day intervals, however at least 20 days must pass between the 2nd and 3rd application. If disease conditions are present during this 20 day period, a fungicide other than CURZATE 60 DF Fungicide must be used to protect the crop during this period. Apply no more than 4 applications per crop. Do not apply within 8 days of harvest.

MIXING INSTRUCTIONS
Wear coveralls over long-sleeved shirt and long pants, goggles or face shield, and chemical resistant gloves during mixing, loading, application and repair. Ensure the spraying equipment is clean.
1. Fill spray tank 1/4 to 1/3 full with clean water and engage agitation. Prepare mixture volume to apply a minimum of 200 litres spray volume per hectare.
2. With the agitator running, add the required amount of CURZATE 60 DF Fungicide to the spray tank. Then add the required amount of MANZATE DF Fungicide or MANZATE Pro-Stick Fungicide to the spray tank while maintaining the spray solution agitation.
3. Continue to agitate until CURZATE 60 DF Fungicide and MANZATE DF Fungicide or MANZATE Pro-Stick Fungicide are completely dispersed.
4. Completely fill the remainder of the spray tank with water.
5. On repeat tank loads, draw down the tank contents to less than 10% of the original volume, and repeat from step 1. If more than 10% of the spray volume remains, pre-slurry the CURZATE 60 DF Fungicide and MANZATE DF Fungicide or MANZATE ProStick Fungicide in a bucket of water before adding to the spray tank.
NOTE: Continuous agitation is required to keep CURZATE 60 DF Fungicide and MANZATE DF Fungicide or MANZATE Pro-Stick Fungicide in suspension in the spray tank for a uniform application.
Use spray preparation of CURZATE 60 DF Fungicide and MANZATE DF Fungicide or MANZATE Pro-Stick Fungicide within 48 hours or product degradation may occur. If spray preparation is left standing without agitation, thoroughly agitate before spraying.
Do not mix, load or apply within 15 metres of all wells.
In some cases, tank mixing a pest control product with another pest control product or a fertilizer can result in biological effects that could include, but are not limited to: reduced pest efficacy or increased host crop injury. The user should contact E.I du Pont Canada Company at 1-800-667- 3925 for information before mixing any pesticide or fertilizer that is not specifically recommended on this label. The user assumes the risk of losses that result from the use of tank mixes that do not appear on this label or that are not specifically recommended by E.I du Pont Canada Company.