Dynasty 100FSPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

Broad-spectrum seed treatment fungicide for control of seed and soil-borne diseases on labelled crops.

All seed treated with this product must be conspicuously coloured at the time of treatment

Use Restrictions:
Treated seed must not be used for food, feed or oil processing.
Do not use in hopper-box, planter-box, slurry-box or other non-commercial seed treatment applications at, or immediately before, planting.
All bags containing treated seed for sale or use in Canada must be labelled or tagged as follows: “This seed has been treated with azoxystrobin fungicide. Use gloves when handling treated seed. Do not graze or feed livestock on seeded area for four weeks after planting. Do not use for food, feed or oil processing. Store away from food and feed.”
All bags containing treated seed for export must be labeled or tagged as follows: “FOR EXPORT ONLY - NOT FOR DOMESTIC SALE OR USE IN CANADA. This seed has been treated with azoxystrobin fungicide. Use gloves when handling treated seed. Do not use for food, feed or oil processing. Store away from food and feed.” For treatment of seed for export, the applicator should verify actual registered rate in country of destination and/or use before exportation.

STORAGE
Keep in original container, tightly closed, during storage. Store in a cool, dry, well-ventilated area away from feed and foodstuffs, and out of the reach of children and animals. Do not store at temperatures less than 0 C.

SPILL CLEANUP
Wear appropriate protective equipment (gloves, glasses, apron) when attempting to clean up the spill. If the container is leaking, secure leak and place the container into a drum or heavy gauge plastic bag. Contact Syngenta Canada Inc. (see EMERGENCY NUMBER) for further information.
For spills and leaks - contain the liquid with dikes of inert material (soil, clay, kitty litter, etc.). Absorb the spill onto inert material and shovel into a sealable waste container.
On hard surfaces - sprinkle spill area with detergent and scrub in a small quantity of water with a coarse broom. Let stand 10 minutes then absorb onto an inert material and shovel into the waste container.
On soil - remove the top 15 cm of soil in the spill area and replace with fresh soil. Dispose of all waste including scrub brush in accordance with provincial requirements.

DISPOSAL OF UNUSED, UNWANTED PRODUCT
For information on disposal of unused, unwanted product, contact the manufacturer or the provincial regulatory agency. Contact the manufacturer and the provincial regulatory agency in case of a spill, and for clean-up of spills.

PRODUCT INFORMATION
DYNASTY 100FS Fungicide is a broad spectrum, preventative seed treatment fungicide with systemic properties recommended for the control of labeled diseases. DYNASTY 100FS Fungicide mixes easily with water. When mixing with products from other manufacturers, the compatibility should be tested prior to use by conducting a jar test; mixing all intended seed treatments with the appropriate amount of water in a clear glass container, mix well, and allow to sit for one hour. Remix and observe for incompatibility.
DYNASTY 100FS Fungicide may be applied as a seed treatment following the guidelines specified in the Directions for Use section of this label. Apply DYNASTY 100FS Fungicide as a water-based slurry utilizing standard slurry seed treatment equipment which provides uniform seed coverage. Uneven or incomplete seed coverage may not give the desired level of disease control. Thoroughly mix the recommended amount of DYNASTY 100FS Fungicide into the required amount of water for the slurry treater and dilution rate to be used. Follow the manufacturer’s application instructions for the seed treatment equipment being used. Maintain constant agitation of the slurry during the seed treatment process. Allow the seed to dry before bagging.
Depending on planting equipment, seed treated with DYNASTY 100FS Fungicide or a combination of DYNASTY 100FS Fungicide and other seed treatment products may not flow through planting equipment at the same rate as untreated seed. Recalibrate this equipment before planting treated seed. Observe all precautions, limitations, rates, and directions for use on the respective labels for other seed treatment products before applying.
This product contains no colourant. An appropriate colourant must be added when this product is applied to seed. Regulations pertaining to the "Seeds Act" must be strictly adhered to when using this product.
Note: Treatment of scarred or damaged seed or seed known to be of low vigour and poor quality may result in reduced germination and/or reduction of seed and seedling vigour. Treat a small quantity of seed using equipment similar to that planned for treating the total seed lot. Conduct germination tests on a small portion of the seed before committing the total seed lot to a selected seed treatment. Due to seed quality and seed storage conditions beyond the control of Syngenta Canada Inc., no claims are made to guarantee the germination of carry-over seed or propagating material for all crop seed.

USE RATES
Corn (Field Corn, Seed Corn, Popcorn, Sweet Corn):
For control of labelled seed- and soil-borne pathogens, apply DYNASTY 100FS Fungicide at 10 mL/100 kg of seed (or 0.0025 mg of active ingredient per kernel). For additional disease control, DYNASTY 100FS Fungicide may be mixed with MAXIM XL Seed Treatment Fungicide. DYNASTY 100FS Fungicide may be mixed with CRUISER 5FS Insecticide for control of the labeled insects in commercial seed treatment facilities with closed transfer including closed mixing, loading, calibrating, and closed treatment equipments only. Follow all appropriate directions, precautions, etc. as specified on product labels.
Canola:
For control of labelled seed- and soil-borne pathogens, apply DYNASTY 100FS Fungicide at 100 – 200 mL/100 kg of seed (10 – 20 g of active ingredient per 100 kg of seed). Use the lower rate under normal field conditions. Use the higher rate if there is a history of high disease pressures in the field and/or field conditions favour seed- and soil-borne pathogens.
For additional disease control and control of labeled insects, DYNASTY 100FS Fungicide may be mixed with HELIX Liquid Seed Treatment or HELIX XTra Seed Treatment in commercial seed treatment facilities with closed transfer including closed mixing, loading, calibrating and closed treatment equipments only. Follow all appropriate directions, precautions, etc. as specified on product labels.
Soybeans:
For control of labelled seed- and soil-borne pathogens, apply DYNASTY 100FS Fungicide at 10 – 20 mL/100 kg of seed (or 0.0015 – 0.0030 mg of active ingredient per seed). Use the lower rate under normal field conditions. Use the higher rate if there is a history of high disease pressures in the field and/or field conditions favour seed- and soil-borne pathogens.
For additional disease control, DYNASTY 100FS Fungicide may be mixed with APRON MAXX RTA or APRON MAXX RFC Seed Treatment Fungicide (or MAXIM 480FS Colourless Seed Treatment Fungicide + APRON XL LS Fungicide). For protection from various insects, DYNASTY 100FS Fungicide may be mixed with CRUISER 5FS or 350FS Seed Treatment Insecticides in commercial seed treatment facilities with closed transfer including closed mixing, loading, calibrating, and closed treatment equipments only. For combined protection from labelled insect and soil- and seed-borne pathogens, DYNASTY 100FS Fungicide may be mixed with CRUISER MAXX Beans Seed Treatment under the same “closed system” conditions as noted above. Follow all appropriate directions, precautions, etc. as specified on the respective product labels.