Gardex Industrial Micro Spray ConcentratePlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

DIRECTIONS FOR USE
Cover or remove all food/feed. Cover all food/feed processing surfaces, equipment and utensils or thoroughly wash following treatment. In meat packaging and food processing plants, DO NOT apply when a food/feed processing facility is in operation.

Space spray
Use diluted to kill flies, mosquitoes and gnats in waste areas, roadsides, residential and recreational areas: Space application is a suspension of fine droplets (0.1 to 100 µm) in the air within an indoor space. Dilute concentrate with petroleum distillate at the rate of one part concentrate to two parts oil and mix well. DO NOT apply as an indoor space spray at rates greater than 69 mL/ 100 m3 in dwellings, such as houses, apartments, or in guest rooms of hotels, motels, and resorts. Use at a time when the wind velocity is approximately 8 km/h. With equipment similar to the Micro-Gen or similar ULV equipment, spray at a dosage rate of 425 mL per minute upwind of the area to be controlled. If the equipment is truck mounted keep the speed to approximately 8 km/h. Repeat application as required.

Use undiluted to kill the adult and accessible forms of insect pests. Among these are the rice weevil, yellow meal worm, cadelle, confused flour beetle, saw-toothed grain beetle, Angoumois grain moth, Mediterranean flour moth and Indian meal moth, cigarette beetle of stored food (stored in multiwall paper bags or in cloth bags) in warehouses, storage rooms and similar locations: Space application is a suspension of fine droplets (0.1 to 100 µm) in the air within an indoor space. Close room or warehouse and shut off all ventilating systems. Use a spraying device similar to the Micro-Gen or similar ULV equipment to dispense this product. Use a dosage of 100 mL of this spray per 100 m³ of room space. Repeat applications as necessary for insect control. Leave the room closed for one hour. Do not remain in treated areas. Ventilate treated areas after application either by opening windows and doors or through use of air exchange/ventilation systems confirmed to be operational. Use fans where required to aid in the circulation of air.

Use undiluted to kill accessible stages of insects; indian meal moth, dried fruit beetle, confused flour beetle, sawtoothed grain beetle and cockroaches, infesting dried fruit products in storage or being processed: Space application is a suspension of fine droplets (0.1 to 100 µm) in the air within an indoor space. Close room or warehouse and shut off all ventilating systems. Use a spraying device similar to the Micro-Gen or similar ULV equipment to dispense this product as a fine mist in the air above the trays and shelves. Do not apply to fruit directly. Fruit should be covered during spray operations. Use a dosage not to exceed 160 mL of this spray per 100 m³ of room space. Repeat application at this dosage in any given month. Leave the room closed for one hour. Do not remain in treated areas.
Ventilate treated areas after application either by opening windows and doors or through use of air exchange/ ventilation systems confirmed to be operational. Use fans where required to aid in the circulation of air.

Contact spray
Use undiluted to kill cockroaches, silverfish, ants, spiders and cigarette beetles in enclosed buildings: Crack and crevice is an application directly into narrow openings on the surface of the structure. It does not include thetreatment of exposed surfaces. Narrow openings typically occur at expansion joints, utility entry points and along baseboards and mouldings. Spot application is localized to a surface area not more than 0.2 m2. Spots are not to be adjoining. The combined area of spots is not to exceed 10% of the total surface area of a room. For surface sprays use a low pressure spray not exceeding 345 kPa (50 psi) with particles no less than 0.1 µm in size. With equipment similar to the Micro-Gen or similar ULV equipment apply the spray into all cracks and crevices in woodwork, walls, floors, underneath sinks, behind pipes and all places where these insects shelter. Contact as many insects as possible.
Do not allow spray to contact stored food. Use at a dosage rate of approximately 50 mL per 100 m³ of room space.
Repeat dosage as necessary for control. Leave the room closed for one hour. Do not remain in treated areas.
Ventilate treated areas after application either by opening windows and doors or through use of air exchange/ ventilation systems confirmed to be operational. Use fans where required to aid in the circulation of air.