Garlon RTUPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INFORMATION
Garlon RTU Herbicide is recommended for the selective control of individual undesirable woody plants in pastures and rangelands, forest and woodland management areas and in non-crop areas, including: rights-of-way, electrical power lines, communication lines, pipelines, roadsides and railroads, fencerows and around farm buildings, military bases, industrial, manufacturing and storage sites.

DIRECTIONS FOR USE
For best results, applications of Garlon RTU Herbicide should be made when woody plants are actively growing.

GENERAL USE PRECAUTIONS
• DO NOT apply by air.
• DO NOT contaminate irrigation or drinking water supplies or aquatic habitats by cleaning of equipment or disposal of wastes.
• As this product is not registered for the control of pests in aquatic systems, DO NOT use to control aquatic pests.
• Do not use this product more than once per year.
• Apply only when potential for drift to areas of human habitation or areas of human activity such as houses, cottages, schools and parks is minimal.
• Do not use this product as a broadcast foliar spray in residential areas. Residential areas are defined as sites where bystanders including children may be potentially exposed during or after spraying.
This includes around homes, schools, parks, playgrounds, playing fields, public buildings or any other areas where the general public, including children, could be exposed.
Slaughter Withhold
Withdraw livestock from grazing treated grass or consumption of treated hay at least 3 days prior to slaughter.

DIRECTIONS FOR USE - BASAL BARK APPLICATIONS
General Information and Instructions
For the selective control of individual, undesirable woody plants, use Garlon RTU as directed below. Do not add water, mineral oil or vegetable oil. Do not dilute. Garlon RTU is formulated to be used right out of the container. Use low nozzle pressure to minimize spattering of spray solution off the target stem.
For best results, apply when stem and bark are dry.
One-Sided Low Volume
To control woody plants with stems less than 15 cm in basal diameter, apply Garlon RTU Herbicide with a knapsack or backpack sprayer using a flat fan or solid cone nozzle, or wick attachment. Low pump pressures of 70 to 210 kPa are recommended. Spray the basal parts of at least one side of each stem to thoroughly wet the lower 30 cm, including the root collar area, but not to the point of runoff. Apply at any time, including the winter months, except when snow or water prevents spraying at the ground line.

Streamline
To control woody plants, apply using a knapsack or backpack sprayer with a flat fan or solid cone nozzle, or wick attachment. Low pump pressures of 70 to 210 kPa are recommended. Apply sufficient spray to one side of stems less than 8 cm in basal diameter to form a band 5 cm in width. When the optimum amount of spray mixture is applied, the treated zone should widen to encircle the stem within approximately 30 minutes. Treat both sides of stems which are 8 to 15 cm in basal diameter. Direct the spray at a point on the stem that is approximately 30 to 50 cm above ground level. Optimal results are achieved when applications are made to young vigorously growing stems which have not developed the thicker bark characteristics of slower growing, understory trees in older stands. Apply at any time, including the winter months, except when snow or water prevents spraying at the desired height above ground level.