Metallica
- Manufacturer
- Sharda
- Category
- Herbicides
- Registered until
- 2026-12-31
- Registration number
- 34054
- Active materials
- S-metolachlor915 g/l
DIRECTIONS FOR USE
Field sprayer application: DO NOT apply during periods of dead calm. Avoid application of this product when winds are gusty. DO NOT apply with spray droplets smaller than the American Society of Agricultural Engineers (ASAE S572.1) fine classification. Boom height must be 60 cm or less above the crop or ground.
APPLICATION INFORMATION:
DO NOT APPLY USING AERIAL APPLICATION EQUIPMENT. PRE-PLANT SURFACE APPLICATION:
For minimum tillage (reduced tillage), and no-till (zero-till) systems in corn and soybeans.
Applications may be made up to 30 days before planting.
To the extent possible, do not move treated soil out of the row or move untreated soil to the surface during planting, or weed control will be diminished.
PRE-PLANT INCORPORATION:
Immediate incorporation is not necessary.
Incorporation equipment should include rolling or western harrows.
On sandy soils, heavy rainfall following an incorporated treatment may cause leaching of the herbicide.
MIXING AND SPRAYING INSTRUCTIONS:
Spray Pressure - 200 - 300 kPa
Spray Volume - minimum 150 litres per hectare. The use of higher water volumes and larger spray tip sizes will generally increase spray deposition and reduce drift.
Keep bypass line at bottom of tank to minimize foaming.
Use 16 mesh suction screens, 50 mesh line and tip screens.
1. Fill sprayer 1/2 full of carrier. Start gentle agitation.
2. Add wettable powder or wettable granule tank-mix partner, if applicable. Slurry with water first if using liquid fertilizers as the carrier.
3. Add liquid flowable tank-mix partner, if applicable, and agitate thoroughly.
4. Fill tank 9/10 full of carrier and add METALLICA Herbicide and other emulsifiable concentrate or solution tank-mix partners.
5. Top off tank with carrier, maintain agitation and spray.
6. Do not let stand without agitation.
7. Sprayer equipment should be thoroughly flushed with clean water and drained before and after use of METALLICA Herbicide and its tank mixes. Apply evenly to a firm, lump-free seed bed.
Rain is required within 10 days or a shallow cultivation or use of a rotary hoe is necessary.
Pre-emergent applications may also be made in reduced tillage, ridge tillage, and no-till systems in corn and soybeans.
Minimize exposure of untreated soil when cultivating or fertilizing.
POST-EMERGENT APPLICATION:
CORN ONLY.
Apply when corn is in the spike to 6-leaf stage and before weeds pass the 2-leaf stage.
Some leaf burn may occur, but yield will not be affected.
DO NOT tank-mix METALLICA Herbicide with fluid fertilizers, oils, oil concentrates or surfactants when applying post-emergent.
Do not graze/feed or harvest corn within 80 days of making a post-emergent application.
CAUTION:
Do not apply to soils that contain less than 1% or more than 10% organic matter. Winter cereals may be planted 4 1/2 months following application. If drought conditions persist after either a pre-plant surface, pre-plant incorporated or pre-emergent application, annual grass control may not be adequate.
MIXING AND SPRAYING INSTRUCTIONS:
Spray Pressure - 200 - 300 kPa
Spray Volume - minimum 150 litres per hectare. The use of higher water volumes and larger spray tip sizes will generally increase spray deposition and reduce drift.
Keep bypass line at bottom of tank to minimize foaming.
Use 16 mesh suction screens, 50 mesh line and tip screens.
1. Fill sprayer 1/2 full of carrier. Start gentle agitation.
2. Add wettable powder or wettable granule tank-mix partner, if applicable. Slurry with water first if using liquid fertilizers as the carrier.
3. Add liquid flowable tank-mix partner, if applicable, and agitate thoroughly.
4. Fill tank 9/10 full of carrier and add METALLICA Herbicide and other emulsifiable concentrate or solution tank-mix partners.
5. Top off tank with carrier, maintain agitation and spray.
6. Do not let stand without agitation.
7. Sprayer equipment should be thoroughly flushed with clean water and drained before and after use of METALLICA Herbicide and its tank mixes.
Registered for cultures | Rate |
---|---|
Corn | 1.25 - 1.75 l |
Soybeans | 1.15 - 1.75 l |
Dry lima beans | 1.15 - 1.75 l |
Snap beans | 1.15 - 1.75 l |
Potatoes | 1.25 - 1.75 l |
Sugar beets | 1.25 - 1.75 l |
Rutabagas | 1.25 - 1.75 l |
Lupines | 1.1 - 1.75 l |