PenshuiPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

DIRECTIONS FOR USE

As this product is not registered for the control of pests in aquatic systems, DO NOT use to control aquatic pests.
DO NOT contaminate irrigation/drinking water supplies or aquatic habitats by cleaning of equipment or disposal of wastes.

Field sprayer application
DO NOT apply during periods of dead calm. Avoid application of this product when winds are gusty. DO NOT apply with spray droplets smaller than the American Society of Agricultural and
Biological Engineers (ASABE) medium classification.
DO NOT apply using aerial application equipment.
Buffer zones
The buffer zones specified in the table below are required between the point of direct application and the closest downwind edge of sensitive terrestrial habitats (such as grasslands, forested areas, shelter belts, woodlots, hedgerows, riparian areas and shrublands), sensitive freshwater habitats (such as lakes, rivers, sloughs, ponds, prairie potholes, creeks, marshes, streams, reservoirs and wetlands) and estuarine/marine habitats.

FIELD CORN
GENERAL INFORMATION
PENSHUI herbicide applied on corn will control certain annual grass and annual broadleaved weeds (see appropriate section under Application Directions for weeds controlled).
PENSHUI herbicide can be applied on corn alone as a pre-emergence treatment or in tank mix with atrazine, BANVEL II or MARKSMAN at pre-emergence or post-emergence timings.
PENSHUI herbicide may also be applied as a post-emergence treatment in tank mix with Elim EP 25% DF, Elim EP 25% DF plus BANVEL II, Accent 75 DF plus BANVEL II, glyphosate or MARKSMAN + glyphosate. Apply post-emergence tank mixes with glyphosate to glyphosate tolerant corn only (i.e., varieties with the Roundup Ready gene).
For burndown and residual control of selected annual weeds, PENSHUI herbicide may be tank mixed with Roundup1 or Touchdown iQ Liquid Herbicide and applied after seeding but before crop emergence.
PENSHUI herbicide tank mixture treatments are most effective in controlling weeds when adequate rainfall is received within 7 days after application. If cultivation is necessary because of soil crusting, soil compaction, or weed germination before rain, use shallow tillage (such as rotary hoe), and make certain corn seeds are below the tilled area. After early post-emergence treatments, wait 7 to 10 days before cultivating. Annual grasses must be in the 2-leaf stage or smaller at the time of early post-emergence application. A shallow cultivation or rotary hoeing will generally result in improved weed control.
Read and follow the label of tank mix partner products regarding specific precautions, restrictions and application information.

APPLICATION DIRECTIONS
Uniformly apply with properly calibrated ground equipment using a minimum of 200 L water per hectare.
Use a properly calibrated low-pressure (138 kPa to 276 kPa) sprayer equipped with 80o or 110o flat fan nozzles to achieve uniform spray distribution and minimize drift. Keep the by-pass line on or near the bottom of the tank to minimize foaming. Nozzle screens must be no finer than 50 mesh.