Sinmas 225Plant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

General Instructions:

Use of Wetting Agent:

• Add a non-ionic surfactant at registered label rates when diluting with water.

Spray Preparation:

• Quarter to half fill spray tank with water.

• Add the required amount of the product and complete filling with water.

• Add a non-ionic surfactant and continue agitation before spraying.

Application:

a) Larvicidal:

• Apply when infestation reaches an economically damaging level.

• Repeat as needed.

• Use lower rates on small larvae and light infestations, higher rates on large larvae and heavier infestations.

b) Ovicidal/Larvicidal:

• Use lower rates when only eggs are present, higher rates for heavy egg lays or larvae less than 3 mm.

• For larvae longer than 3 mm, use larvicidal rates.

Tree and Vine Crops - Dilute Spraying:

• Apply with a sprayer designed for high water volumes.

• Achieve even coverage throughout the crop canopy.

• Spray to the point of run-off.

Tree and Vine Crops - Concentrate Spraying:

• Use a sprayer designed for concentrate spraying.

• Determine appropriate dilute spray volume and mixing rate based on crop canopy.

• Adjust spray volume and operation as the crop grows.

Non-tree and Vine Crops - Ground Application:

• Apply as a fine spray preferably using cone nozzles.

• Ensure proper timing and good coverage.

• Use 100-400 L/ha spray mixture unless directed otherwise.

Aerial Application:

• Adjust spray volumes based on product rates.

• Use appropriate droplet sizes based on application volume.

• Avoid application in calm conditions, apply in light to moderate crosswinds to reduce drift.

Insecticide Resistance Warning:

• Sinmas 225 Insecticide is a Group 1A insecticide.

• Resistance may develop with repeated use.

• Consult local suppliers or agricultural department agronomists for resistance management strategies.

Compatibility:

• Sinmas 225 Insecticide is compatible with a wide range of pesticides.

• Keep unprotected persons out of operational area during treatment and avoid contact with spray residues.

Storage and Disposal:

• Store in closed, original container in a dry, cool, well-ventilated area.

• Do not contaminate seed, feed, or foodstuff.

• Dispose of rinsate properly and do not dispose of undiluted chemicals on site.

• Follow recycling or waste management regulations for container disposal.