ViatudePlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

Corteva Agriscience Viatude fungicide with Onmira active provides best-in-class sclerotinia and white mould protection in canola and soybeans. Premium performance is delivered through a unique combination of two of the strongest sclerotinia and white mould actives on the market today, delivering multiple modes of action in an all-in-one premixed formulation for ease of use.

GENERAL INFORMATION

Viatude Fungicide is a broad-spectrum fungicide, recommended for control or suppression of Sclerotina stem rot (white mould) caused by Sclerotinia sclerotiorum and has curative and locally systemic activity. Viatude Fungicide must be applied in a regularly scheduled protective spray program in rotation with other fungicides. See directions below for specific crop/disease recommendations.
Viatude Fungicide can be applied with ground or air, except as otherwise directed, using sufficient water to obtain thorough coverage of plants. Minimum aerial application volume is 50 L/ha and minimum ground application volume is 150 L/ha.
For all disease claims listed below, Viatude Fungicide will provide either control or suppression, as indicated, when applied as directed.

APPLICATION INFORMATION

As this product is not registered for the control of pests in aquatic systems, DO NOT use to control aquatic pests.
DO NOT contaminate irrigation or drinking water supplies or aquatic habitats by cleaning of equipment or disposal of wastes.

GROUND APPLICATION INSTRUCTIONS

Field sprayer application: DO NOT apply during periods of dead calm. Avoid application of this product when winds are gusty. DO NOT apply with spray droplets smaller than the American Society of Agricultural Engineers (ASAE S572.1) medium classification. Boom height must be 60 cm or less above the crop or ground.

Mixing Instructions
1. Shake well before use.
2. Fill clean spray tank 1/4 - 1/2 full of water.
3. While agitating, add the required amount of Viatude Fungicide, continuing agitation until the product is completely dispersed.
4. Continue filling the tank with agitation.
Mix thoroughly to fully disperse the fungicide; once dispersed continued agitation is required. Use mechanical or hydraulic means; do not use air agitation.

AERIAL APPLICATION INSTRUCTIONS

Aerial application: DO NOT apply during periods of dead calm. Avoid application of this product when winds are gusty. DO NOT apply when wind speed is greater than 16 km/h at flying height at the site of application. DO NOT apply with spray droplets smaller than the American Society of Agricultural Engineers (ASAE S572.1) medium classification. Reduce drift caused by turbulent wingtip vortices. Nozzle distribution along the spray boom length MUST NOT exceed 65% of the wing- or rotorspan.
Apply only by fixed-wing or rotary aircraft equipment, which has been functionally and operationally calibrated for the atmospheric conditions of the area and the application rates and conditions of this label.
Label rates, conditions and precautions are product specific. Read and understand the entire label before opening this product. Apply only at the rate recommended for aerial application on this label. Where no rate for aerial application appears for the specific use, this product cannot be applied by any type of aerial equipment.
Ensure uniform application. To avoid streaked, uneven or overlapped application, use appropriate marking devices.

Use Precautions
Apply only when meteorological conditions at the treatment site allow for complete and even crop coverage. Apply only under conditions of good practice specific to aerial application as outlined in the “National Aerial Pesticide Application Manual, developed by the Federal/Provincial/Territorial Committee on Pest Management and Pesticides”.

Operator Precautions
Protective clothing, aircraft cockpit and vehicle cabs must be decontaminated regularly.

Product Specific Precautions
Read and understand the entire label before opening this product. If you have questions, call the manufacturer at 1-800-667-3852 or obtain technical advice from the distributor or your provincial agricultural representative. Application of this specific product must meet and/or conform to the following:
Volume: Apply the recommended rate in a minimum spray volume of 50 litres per hectare.