Boogie Xpro

Manufacturer
BAYER
Category
Fungicides
Registered until
N/A
Registration number
03689
Active materials
Links

For professional use only.
A fungicide for the control of stem-base, foliar and ear diseases in winter and spring wheat, triticale and winter rye.
An emulsifiable concentrate formulation containing 50 g/L (5.1% w/w) bixafen and 100 g/L (10.1% w/w) prothioconazole and 250 g/L (25.3% w/w) spiroxamine.

DIRECTIONS FOR USE
IMPORTANT: This information is approved as part of the Product Label. All instructions within this section must be read carefully in order to obtain safe and successful use of this product.
Boogie Xpro is a mixture of a carboxamide, triazolinthione and spiroketoalamine fungicides recommended for control of a wide range of diseases on winter and spring wheat, winter rye and triticale.

Method of application: Tractor mounted sprayer
A spray pressure of 2-3 bar is recommended. Apply Boogie Xpro in 100-300 litres per hectare water.
Apply as a medium spray quality.

WINTER EHEAT, SPRING WHEAT, WINTER RYE, TRITICALE
Diseases: Eyespot (Oculimacula spp.), Septoria leaf blotch (Mycosphaerella graminicola), Glume blotch (Septoria nodorum), Powdery mildew (Blumeria graminis), Yellow rust, Brown rust, Tan spot, Fusarium Ear blight, Sooty moulds, Rhynchosporium Leaf blotch.
Rate: 1.5l/ha
Critical comments: maximum total dose per season - 3l/ha. Latest time of application: before grain milky ripe stage, (GS 73).

CROPS
Boogie Xpro may be used on all commercial varieties of winter and spring wheat, triticale and winter rye.

APPLICATION
Water volume Apply Boogie Xpro in 100-300 litres per hectare water. The higher spray volumes are recommended where the crop is dense or disease pressure / risk is high to ensure good penetration to the lower leaves and stem bases. Disease control may be compromised by reducing water volumes, where good spray coverage is difficult to achieve.
A spray pressure of 2-3 bar is recommended.
Spray quality
Apply as a MEDIUM spray quality (as defined by BCPC).
Latest Permitted Timing
In wheat, triticale and rye Boogie Xpro may be applied at any stage before grain milky ripe stage
Mixing
Thoroughly shake the pack before use.
Add the required quantity of Boogie Xpro to the half-filled spray tank with the agitation system in operation and then fill to the required level. Continue agitation at all times during spraying and stoppages until the tank is completely empty. Spray immediately after mixing.
General
Sprayers should be thoroughly cleaned with water and detergent after use, and filters and jets checked for damage and blockages.

Boom height should be adjusted to ensure even coverage of the crop, particularly at later growth stages. The correct height is one at which the spray from alternate nozzles meets just above the crop, In dense crops, at later growth stages, higher water volumes should be used.

APPLICATION TIMING
Eyespot (Oculimacula spp.)
Spray in the spring at the first sign of disease, from when the leaf sheaths begin to become erect until the 2nd node is detectable (GS 30-32).
Septoria Leaf Blotch and Glume Blotch (Mycosphaerella graminicola and Stagonospora nodorum)
Apply before disease is established in the crop. To protect the upper leaves and ear apply Boogie Xpro at full flag leaf emergence (GS 37) up to mid-flowering (GS 65). Where disease pressure remains high application may be repeated.
Applications to upper leaves where S. tritici (M. graminicola) symptoms are present are likely to be less effective.
Boogie Xpro contains a DMI fungicide. Resistance to some DMI fungicides has been identified in Septoria leaf blotch (M.graminicola) which may seriously affect the performance of some products. For further advice on resistance management in DMI’s contact your agronomist or specialist advisor, and visit the FRAG-UK website.

Powdery Mildew (Blumeria graminis)
Apply Boogie Xpro at the first signs of disease. Where disease pressure remains high application may be repeated.
Yellow Rust (Puccinia striiformis)
Apply Boogie Xpro at the first signs of disease. A second application may be made 2-3 weeks later if re-infection occurs. Applications made to established infections are likely to be less effective.
Brown Rust (Puccinia triticina and P. recondita)
Apply Boogie Xpro at the first signs of disease. A second application may be made 2-3 weeks later if re-infection occurs. Applications made to established infections are likely to be less effective.
Tan Spot (Pyrenophora tritici-repentis)
Apply Boogie Xpro at the first signs of disease in spring or early summer. Where disease pressure remains high application may be repeated.
Ear Disease Complex
Apply Boogie Xpro soon after ear emergence until the end of flowering (GS 59-69) for moderate control of Fusarium ear blight in wheat and reduction of sooty moulds. Control of ear diseases can result in cleaner, brighter ears.
Leaf Blotch (Rhynchosporium secalis)
Apply Boogie Xpro in spring at the first signs of disease. For severe infections a second application may be necessary 2-3 weeks later.

RESISTANCE STRATEGY
Repeated application of Boogie Xpro alone should not be used on the same crop against a high risk pathogen such as cereal powdery mildew. Tank-mixtures or alternation with fungicides having a different mode of action have been shown to protect against the development of resistant forms of disease.
CAUTION:
The possible development of disease strains resistant to Boogie Xpro cannot be excluded or predicted. Where such resistant strains occur, BoogieXpro is unlikely to give satisfactory control.

 

Registered for culturesRateBBCH
Spring rye1.5 l30 - 73
Winter rye1.5 l30 - 73
Winter triticale1.5 l30 - 73
Spring triticale1.5 l30 - 73
Spring wheat1.5 l30 - 73
Winter wheat1.5 l30 - 73