EdiproPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

Contains 722 g/L (62.9% w/w) Propamocarb hydrochloride as a Soluble Concentrate.
Fungicide for the control of foliar blight (Phytophthora infestans) on potato.

Potato (ware)
Pest: Foliar blight (Phytophtora infestans)
Rate of Use: 1.4 L/ha in 500 litres water per hectare.
Timing: Timing of the first application depends on the development of the crop and the weather conditions. The first spray should be applied as soon as there is a risk of blight infection. Subsequent applications should be made every 10-14 days (every 10 days for irrigated crops and under conditions of very high disease pressure).

IMPORTANT:
This information is approved as part of the Product Label. All instructions within this section must be read carefully in order to obtain safe and successful use of this product.

RESTRICTIONS OR WARNING
Wait 14 days after last treatment before harvesting the crop.
To avoid the build-up of resistance alternate pesticides in a planned spray program with products of a different type. Total reliance on one pesticide will hasten the development of resistant strains of a pest.
Do not apply if rain is imminent.
Safety to daughter tubers for propagation cannot be guaranteed.
Consult processor before growing on crops being grown for processing.
Rinse all equipment well immediately after use as Edipro is corrosive. Follow any specific washing instructions on the label of products applied in mixture with Edipro.

DISEASES CONTROLLED
Edipro is a systemic and fungistatic carbamate fungicide containing 722 g/L propamocarb hydrochloride. It must always be used in tank mixtures with a contact fungicide for the preventative treatment of foliar blight (Phytophthora infestans) on potato.

APPLICATION

Application equipment: Edipro is corrosive to all metals except stainless steel. Rinse metal equipment with water immediately after use. Apply using standard field sprayers only.
Spraying: Add the required quantity of Edipro to a half-filled spray tank with continuous agitation, then add the remaining volume of water. Spray immediately after mixing and continue agitation during spraying.
Wash out the sprayer thoroughly with water immediately after use as Edipro is corrosive to metal.
Tank-Mix recommendations: Edipro should not be used alone but only in mixture with another fungicide such as mancozeb, fluazinam, cymoxanil or cyazofamid at the recommended label rate. Always follow the instructions given on the label of the tank-mix partner.