Farmco Grazing Special
- Farmco Agritrading
- Registered until
- Registration number
- Active materials
- 240 g/l
- 60 g/l
An emulsifiable concentrate containing 240 g/litre triclopyr (present as 334 g/litre of triclopyr butotyl) and 60 g/litre clopyralid.
A foliar acting herbicide for the control of NETTLES, DOCKS, THISTLES, BRAMBLES, BROOM and GORSE in ESTABLISHED GRASSLAND and AMENITY GRASSLAND.
DIRECTIONS FOR USE
IMPORTANT: This information is approved as part of the Product Label. All instructions within this section must be read carefully in order to obtain safe and successful use of this product.
Read all warnings before applying FARMCO GRAZING SPECIAL.
Do not roll or harrow grass for 10 days before or 7 days after application.
Do not spray in drought, very hot or very cold weather.
FARMCO GRAZING SPECIAL is safe to grass. Very occasionally some yellowing of the sward may occur; this is transient and quickly outgrown.
Clover will be killed or severely checked by application of FARMCO GRAZING SPECIAL.
DO NOT sow kale, swedes, turnips or grass mixtures containing clover by direct drilling or minimum cultivation techniques within 6 weeks of applying FARMCO GRAZING SPECIAL.
FARMCO GRAZING SPECIAL residues in plant tissues (including manure and digestate) that have not completely decayed may affect succeeding susceptible crops e.g. peas, beans and other legumes, carrots and Umbelliferae, potatoes and tomatoes, lettuce and other Compositae. Do not plant susceptible autumn-sown crops (e.g. winter beans) in the same year as treatment with FARMCO GRAZING SPECIAL. Where susceptible crops are to be planted in the spring do not apply FARMCO GRAZING SPECIAL later than the end of July of the previous year. Following good agricultural practice ensure that plant remains have completely decayed before planting susceptible crops.
Do not use any plant material treated with FARMCO GRAZING SPECIAL for composting or mulching.
Do not use manure from animals fed on crops treated with FARMCO GRAZING SPECIAL for composting.
In hot conditions, vapour drift may occur, making it particularly important to assess the risk to neighbouring vegetation. Take extreme care to avoid drift onto crops and non-target plants outside the target area.
Do not apply directly to, or allow spray drift to come into contact with agricultural or horticultural crops, amenity plantings or gardens, ponds, lakes or watercourses.
All conifers, especially pine and larch, are very sensitive to spray drift.
Exclude livestock during treatment and do not allow livestock to graze treated grassland for at least 7 days following treatment, and until foliage of any poisonous weeds which may have been affected by application has died and become unpalatable.
WEEDS CONTROLLED, RATE OF USE AND APPLICATION TIMING
The following weeds will be controlled by an application of FARMCO GRAZING SPECIAL at a rate of 60 mL of product in 10 litres of water (6 mL product in 1 litre of water). Maximum individual dose is 1.2L product/Ha. The weeds should be thoroughly wetted with the spray solution but spraying until “run-off” will decrease activity. The use of flood jets is recommended to prevent drift. Care should be taken to avoid local overdosing. If the grass has been cut for hay or silage or grazed leave for 2-3 weeks to allow sufficient re-growth to occur before spraying. Grass and weeds must be actively growing to ensure good weed control and minimal check to the grass.
To allow maximum translocation of FARMCO GRAZING SPECIAL to the roots do not cut grass for 28 days after application.
Apply FARMCO GRAZING SPECIAL using a handheld sprayer. Ensure the equipment is in good working order and has been calibrated according to the manufacturers’ recommendations. For spot treatment via Knapsack use 60ml of FARMCO GRAZING SPECIAL in 10L of water. Use a suitable lance from a knapsack or tractor mounted sprayer. The weeds should be thoroughly wetted with the spray solution but spraying until “run-off” will decrease activity.
The use of flood jets is recommended to prevent drift. Care should be taken to avoid local overdosing.
Wash out spray equipment thoroughly with water and detergent immediately after use. Traces of FARMCO GRAZING SPECIAL could cause harm to susceptible crops sprayed later.
DO NOT APPLY through hand-held rotary atomiser equipment.
|Registered for cultures||Rate||Preharvest Interval|