Iseran

Manufacturer
Sipcam
Category
Herbicides
Registered until
N/A
Registration number
06825
Active materials
Links

A herbicide for the control of annual grasses and broad-leaved weeds in forage and grain maize including crops grown under temporary plastic.

DIRECTIONS FOR USE


IMPORTANT: This information is approved as part of the
Product Label. All instructions within this section must be read carefully in order to obtain safe and successful use of this product.
ISERAN is a herbicide for the control of broad-leaved weeds in forage and grain maize including crops grown under temporary plastic.

Restrictions/Warnings
Do not apply to broadcast crops.
Some transient crop bleaching may occur under certain climatic conditions and can be severe where heavy rainfall follows application. This transient crop effect is rapidly outgrown and has no effect on crop yield.
Do not use on soils that are compacted or of a poor structure which may then be liable to water logging.
Reduced levels of weed control may occur if application is made to dry cloddy seedbeds or if a prolonged dry period follows application.
Do not overlap spray swaths.
For crop safety ensure seed is well covered with a MINIMUM of 20mm of settled soil.
Do not use on sands or very light soils. Do not use on soils with more than 10% organic matter.
EXTREME CARE MUST BE TAKEN TO AVOID SPRAY DRIFT to avoid damage to plants outside the target area.
DO NOT APPLY under windy conditions.
Consult processor before using on crops for processing.
Addition of an adjuvant or tank mix wetting agent is not recommended.

Resistance management
ISERAN contains clomazone and mesotrione belonging to
HRAC Mode of Action Groups 13 and 27 respectively.
There is a risk of the development of weed resistance to
ISERAN. A strategy for preventing and managing such resistance should be adopted that includes alternation with herbicides with a different mode of action and a similar spectrum of activity. Guidelines have been produced by the Weed Resistance Action Group and copies are available from the your distributor, crop adviser or product manufacturer.

Application
Ensure good, even spray cover of the target crop and weeds. Apply using COARSE quality spray, as defined by BCPC, through a conventional field crop sprayer. Do not leave spray liquid in the sprayer for longer periods (i.e. overnight).