NinjaPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

DIRECTIONS FOR USE

NINJA 10CS acts by contact, therefore ensure thorough spray cover for good control.

Preparation of sprayer:
Part fill the spray tank with clean water and start agitation. Shake the container and add the correct amount of NINJA 10CS to the sprayer using a filling device (eg. induction bowl, probe etc.) or by direct addition to the spray tank.
Wash out container thoroughly. Preferably use an integrated pressure rinsing device or manually rinse three times. Add washings to the sprayer at the time of filling.
Dispose of rinsed container safely.

Spraying: Ensure adequate volume and pressure is used and that the sprayer is correctly calibrated before use. Do not leave the spray liquid in the sprayer for long periods (i.e. during meals or overnight).

Resistance: Strains of some aphid species are resistant to many aphicides. Where aphids resistant to products containing lambda-cyhalothrin occur, NINJA 10CS is unlikely to give satisfactory control. Repeat treatments are likely to result in lower levels of control.
To ensure maximum and prolonged effectiveness and to minimise the likelihood of resistant strains of pests developing, it is recommended that a non-pyrethroid insecticide is incorporated into annual spray programmes.
Control may be reduced where strains of pest resistant to NINJA 10CS develop.
Processed crops - Taint tests have shown that NINJA 10CS does not taint crops, but growers should consult processors before use.
This product may only be used in a tank mix or in sequence with other products when these uses comply with the label recommendations of every product in the tank/mix/sequence.
Compatibilty – Please consult Syngenta Ireland for advice on mixture products.
This product is to be used only in accordance with the recommendations and instructions given on the labels provided with this pack. Use in any other circumstances is entirely at user’s risk.