Redigo MPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

DIRECTIONS FOR USE

IMPORTANT: This information is approved as part of the Product Label. All instructions within this section must be read carefully in order to obtain safe and successful use of this product.

DISEASES CONTROLLED
For the control of Fusarium, Pythium and other damping–off diseases.

CROPS
Maize (grain maize, fodder maize and sweetcorn)

RATE OF USE
Rate of use: 15 ml of Redigo M per seed unit (50,000 seeds)
Thoroughly mix until the seed is evenly coated.
Before filling the treated seed into bags ensure that the seed dressing is completely dry

APPLICATION

Redigo M must only be used in conjunction with
Bayer CropScience approved seed treatment application equipment by following the procedures given in the operating instructions. ALWAYS follow the operating instructions.
Ensure that Redigo M is homogeneous before use.
Where necessary, the product should be fully redispersed using a re-circulating pump or mechanical agitator. For further advice on re-dispersing Redigo please contact the local Seed Treatment Engineer of Bayer CropScience Ltd
Warning: containers of greater than 20 litres capacity should be handled only with mechanical assistance.
Redigo M should be evenly applied using a Bayer
CropScience recommended seed treatment machine, which has been accurately calibrated to obtain the correct dose rate.
Redigo M should be co-applied with a maximum of 2 – 4 litres of water per tonne of seed to improve the evenness of coverage of treated seed. The amount of water used will depend on the type of seed treater used and processing conditions.
For further details please contact the local Seed
Treatment Engineer of Bayer CropScience Ltd.
After use the product application equipment should be thoroughly cleaned using clean water.