Luxinum PlusConfronto tra i prodotti fitosanitariConfronto tra i prodotti fitosanitariSegnala le imprecisioniSegnala le imprecisioni

DIRECTIONS FOR USE

IMPORTANT: This information is approved as part of the Product Label. All instructions within this section must be read carefully in order to obtain safe and successful use of this product.

Crop Specific Information
Crops
Luxinum Plus can be used on all varieties of winter wheat.and spring barley.

Time of application
Luxinum Plus should be applied from pre-emergence up to GS 30 of the crop.

Rate of application
Apply Luxinum Plus at 0.7 litre per hectare.

Mixing
Never prepare more spray solution than is required.
Fill the spray tank three quarters full with water and start the agitation. To ensure thorough mixing of the product, invert the container several times before opening. Add the required quantity of Luxinum Plus to the spray tank while re-circulating. Continue agitation until spraying is completed.
On emptying the product container, rinse container thoroughly by using an integrated pressure rinsing device or manually rinsing three times. Add washings to sprayer at time of filling and dispose of container safely.

Application
Apply Luxinum Plus in 100-300 litres of water per hectare.
Apply with a MEDIUM spray as defined by BCPC.
To ensure optimum spray coverage and minimize spray drift, adjust the spray boom to the appropriate height above the crop, according to guidance provided by the sprayer and/or nozzle manufacturer.