AproviaComparación de productos fitosanitariosComparación de productos fitosanitariosNotificar inexactitudesNotificar inexactitudes

EMULSIFIABLE CONCENTRATE

For broad-spectrum disease control or suppression in potatoes, fruiting vegetables, cucurbits vegetables, pome fruit, blueberries, and small fruit vine climbing subgroup (grapes).


STORAGE
Keep in original container, tightly closed, during storage. Store in a cool, dry, well-ventilated area away from feed and foodstuffs, and out of the reach of children and animals. To prevent contamination store this product away from food or feed.


GENERAL INFORMATION
APROVIA is a broad-spectrum product and is recommended for the control or suppression of many important plant diseases. APROVIA provides disease control of many rust, leaf spots and powdery mildews. APROVIA is primarily applied as a foliar spray and can be used in block, or alternating spray programs with other crop protection products. All applications should be made according to the use directions listed in the label.


ROTATIONAL CROP RESTRICTIONS
Please see the following table for the crop rotational restrictions:
Rotational Crops - Planting Time From Last APROVIA Application
Potatoes and tuberous and corm vegetable subgroup (CG 1C); Dried shelled pea and bean subgroup (CG 6C); Soybeans; Fruiting vegetables crop group (CG 8-09); Cucurbit vegetables crop group (CG 9); Cereals (wheat, barley, oats, rye, triticale); Corn (field, sweet, pop and specialty); Rapeseed subgroup (CG 20A) - 0 days
All other crops Intended for Food and Feed - 6 months/180 days


DIRECTIONS FOR USE
As this product is not registered for the control of pests in aquatic systems, DO NOT use to control aquatic pests.
DO NOT contaminate irrigation or drinking water supplies or aquatic habitats by cleaning of equipment or disposal of wastes.


MIXING PROCEDURES
Prepare only the amount of spray mixture that is needed for the immediate operation. Thoroughly clean spray equipment before using this product. Vigorous agitation is necessary for proper dispersal of the product. Maintain maximum agitation throughout the spraying operation. Do not let the spray mixture stand overnight in the spray tank. Flush the spray equipment thoroughly following each use and apply the rinsate to a previously treated area.
APROVIA is an emulsifiable concentrate (EC) formulation.
Prepare no more spray mixture than is required for the immediate operation.
Thoroughly clean spray equipment before using this product.
Agitate the spray solution before and during application.
Rinse spray tank thoroughly with clean water after each day’s use and dispose of pesticide rinsate by application to an already treated area.

APROVIA Alone (No Tank Mix)
Add 1/2-2/3 of the required amount of water to the spray or mixing tank.
With the agitator running, add APROVIA to the tank.
Continue agitation while adding the remainder of the water.
Begin application of the spray solution after APROVIA has completely dispersed into the mix water.
Maintain agitation until all of the mixture has been sprayed.

APROVIA + Tank Mixtures: APROVIA is usually compatible with all tank-mix partners listed on this label. To determine the physical compatibility of APROVIA with other products, use a jar test. Using a jar, add the products to water in the same ratio and order as planned in the spray tank. Add wettable powders and water dispersible granular products first, then liquid flowables, then emulsifiable concentrates and solutions last. After thoroughly mixing, let stand for at least 5 minutes. If the combination remains mixed or can be remixed readily, it is physically compatible. Once compatibility has been proven, use the same order of addition required ingredients to the spray tank.
Tank Mixtures: All directions for use, crops/sites, use rates, dilution rates, precautions, and limitations which appear on the tank-mix product label must be observed. The label dosage for the tank-mix partner is not to be exceeded, and the most restrictive label precautions and limitations are to be followed.
In some cases, tank mixing a pest control product with another pest control product or a fertilizer can result in biological effects that could include, but are not limited to: reduced pest efficacy or increased host crop injury. The user should contact Syngenta Canada Inc. for information before mixing any pesticide or fertilizer that is not specifically recommended on this label. The user assumes the risk of losses that result from the use of tank mixes that do not appear on this label or that are not specifically recommended by Syngenta Canada Inc.
Mixing in the Spray Tank
Add 1/2-2/3 of the required amount of water to the spray or mixing tank.
With the agitator running, add the tank-mix partner(s) into the tank in the same order as described above.
Allow the material to completely dissolve and disperse into the mix water. Continue agitation while adding the remainder of the water and APROVIA to the spray tank.
Allow APROVIA to completely disperse.
Spray the mixture with the agitator running.