Orondis Ultra AComparación de productos fitosanitariosComparación de productos fitosanitariosNotificar inexactitudesNotificar inexactitudes

For control or suppression of certain foliar diseases in vegetable crops.

STORAGE
Store in a cool, dry place. Do not store food, beverages or tobacco products in storage area. To prevent contamination store this product away from food or feed.

DECONTAMINATION AND DISPOSAL
For information on disposal of unused, unwanted product, contact the manufacturer or the provincial regulatory agency. Contact the manufacturer and the provincial regulatory agency in case of a spill, and for clean up of spills.

CONTAINER DISPOSAL:
For recyclable containers:
Do not reuse this container for any purpose. This is a recyclable container, and is to be disposed of at a container collection site. Contact your local distributor/dealer or municipality for the location of the nearest collection site. Before taking the container to the collection site:
1. Triple- or pressure-rinse the empty container. Add the rinsings to the spray mixture in the tank.
2. Make the empty, rinsed container unsuitable for further use.
If there is no container collection site in your area, dispose of the container in accordance with provincial requirements.
For refillable containers:
For disposal, this container may be returned to the point of purchase (distributor/dealer). It must be refilled by the distributor/dealer with the same product. Do not use this container for any other purpose.

GENERAL INFORMATION
ORONDIS ULTRA A Fungicide is a fungicide for control or suppression of certain foliar and root diseases in Brassica vegetables, bulb vegetables, cucurbits, fruiting vegetables, potatoes, leafy vegetables, and edible-podded beans.

DIRECTIONS FOR USE
Rotational Crop Restrictions
Do not plant any crop which is not registered for use with ORONDIS ULTRA A Fungicide for a period of 30 days after the last application.
DO NOT apply this product directly to freshwater habitats (such as lakes, rivers, sloughs, ponds, prairie potholes, creeks, marshes, streams, reservoirs and wetlands), estuarine/marine habitats.
DO NOT contaminate irrigation or drinking water supplies or aquatic habitats by cleaning of equipment or disposal of wastes.
As this product is not registered for the control of pests in aquatic systems, DO NOT use to control aquatic pests.
APPLICATION PROCEDURES
GREENHOUSE USE
DO NOT allow effluent or runoff from greenhouses containing this product to enter lakes, streams, ponds or other waters.
GROUND APPLICATION
Spray nozzles should be selected which will provide accurate and uniform spray deposition. Use spray nozzles, which provide medium-sized droplets and reduce drift. To help ensure accuracy, calibrate sprayer before each use. Do not apply ORONDIS ULTRA A Fungicide through any type of ultra low volume (ULV) spray system. For information on spray equipment and calibration, consult sprayer manufacturers and/or the local agricultural representative specialists.
Apply ORONDIS ULTRA A Fungicide using sufficient water volume to provide thorough and uniform coverage. For ground applications, use a minimum of 100 L/ha unless otherwise indicated on this label. In situations where a dense canopy exists and/or pest pressure is high, use greater water volumes. Avoid making applications under conditions where uniform coverage cannot be obtained or where excessive spray drift may occur. Avoid spray overlap.
Precautions:
1) Select nozzles that can produce the desired droplet sizes at the normal rated pressure range.
2) The sprayer should travel at a uniform speed across the field.
Field sprayer application: DO NOT apply during periods of dead calm. Avoid application of this product when winds are gusty. DO NOT apply with spray droplets smaller than the American Society of Agricultural Engineers (ASAE) fine classification. Boom height must be 60 cm or less above the crop or ground.

MIXING PROCEDURES
1. Add 1/2 of the required amount of water to the mix tank.
2. With the agitator running, add the desired amount of ORONDIS ULTRA A Fungicide to the tank.
3. Continue agitation while adding the remainder of the water.
4. Begin application of the solution after ORONDIS ULTRA A Fungicide has completely dispersed into the mix water.
5. Maintain agitation until all of the mixture has been applied.
Prepare no more spray mixture than is needed for the immediate operation. Thoroughly clean spray equipment before using this product. Vigorous agitation is necessary for proper dispersal of the product. Maintain maximum agitation throughout the spraying operation. Do not let the spray mixture stand overnight in the spray tank. Flush the spray equipment thoroughly following each use and apply the rinsate to a previously treated area. Keep product container tightly closed when not in use.

DIRECTIONS FOR USE
Integrated Pest (Disease) Management: ORONDIS ULTRA A Fungicide should be integrated into an overall disease management strategy that includes varieties with disease tolerance, proper timing of irrigation and removal of plant debris in which inoculum overwinters.
Resistance Management: Follow the resistance management guidelines in the Resistance Management Section. Do not apply more than one application of ORONDIS ULTRA A Fungicide or any other Group 40 fungicide before alternation with at least one application of a fungicide that is not a group 40.