Propi Super 25 ECComparación de productos fitosanitariosComparación de productos fitosanitariosNotificar inexactitudesNotificar inexactitudes

DIRECTIONS FOR USE:
DO NOT use in greenhouses.
A restricted entry interval (REI) of 1 day is required for workers hand-harvesting and detasseling treated corn.
A restricted entry interval (REI) of 5 days is required for workers hand-harvesting and pruning highbush blueberries.
As this product is not registered for the control of pests in aquatic systems, DO NOT use to control aquatic pests.
DO NOT contaminate irrigation or drinking water supplies or aquatic habitats by cleaning of equipment or disposal of wastes.

GENERAL INFORMATION
DO NOT graze animals on treated green crops within three days of application of PROPI SUPER 25 EC Fungicide.

PRODUCT INFORMATION
PROPI SUPER 25 EC is a broad-spectrum systemic fungicide for control of a wide range of diseases on certain crops. PROPI SUPER 25 EC fungicide will protect the crop from yield and quality losses due to disease. PROPI SUPER 25 EC may be used in conjunction with higher seeding rates, higher fertilizer inputs, plant growth regulators and other fungicides as required.
(See “NOTE” under PRECAUTIONS)

Factors Affecting PROPI SUPER 25 EC Performance: PROPI SUPER 25 EC should be applied as a preventative disease control measure. Established diseases are more difficult to control and may have already reduced crop vigour.
If rainfall occurs within one hour of application, reapplication is necessary.
Field Sprayer Application:
DO NOT apply during periods of dead calm. Avoid application of this product when winds are gusty. DO NOT apply with spray droplets smaller than the American Society of Agricultural Engineers (ASAE) medium classification. Boom height must be 60 cm or less above the crop or ground.
Airblast application:
DO NOT apply during periods of dead calm. Avoid application of this product when winds are gusty. DO NOT direct spray above plants to be treated. Turn off outward pointing nozzles at row ends and outer rows. DO NOT apply when wind speed is greater than 16 km/h at the application site as measured outside of the treatment area on the upwind side.

AERIAL APPLICATION:
DO NOT apply during periods of dead calm. Avoid application of this product when winds are gutsy. DO NOT apply when wind speed is greater than 16 km/h at flying height at the site of application. DO NOT apply with spray droplets smaller than the American Society of Agricultural Engineers (ASAE) medium classification. To reduce drift caused by turbulent wingtip vortices, the nozzle distribution along the spray boom length MUST NOT exceed 65% of the wing- or rotor span. High humidity and low temperatures (10 - 20°C) allow for a better deposition of spray droplets.

SPRAYER AND APPLICATION INFORMATION:
The performance of this product depends on correct application. Follow the guidelines given below for optimal application of PROPI SUPER 25 EC.

Ground Application - Mixing and Spraying Instructions:
1. Spray equipment should be thoroughly flushed with clean water before mixing PROPI SUPER 25 EC.
2. Fill spray tank 1/2 full with clean water. Engage gentle agitation.
3. Add the required amount of PROPI SUPER 25 EC and agitate thoroughly.
4. Continue filling the tank with water until the tank is 9/10 full and, if applicable, add the required amount of tank mix partner.
5. Complete filling the spray tank with water, maintaining agitation during mixing and spraying operations.
6. Use nozzle screens no finer than 50 mesh. Keep by-pass line on or near the bottom of the tank to minimize foaming.

Aerial Application - Mixing and Spraying Instructions:
1. Spray equipment should be thoroughly flushed with clean water before mixing PROPI SUPER 25 EC.
2. Fill premix tank 1/2 full with clean water. Engage gentle agitation.
3. Add the required amount of PROPI SUPER 25 EC and agitate thoroughly.
4. Continue filling the tank with water until the tank is 9/10 full and, if applicable, add the required amount of tank mix partner.
5. Complete filling the premix tank with water.
6. Maintain gentle agitation during mixing.
7. Transfer the premix contents into the aircraft spray tank.
8. Maintain sufficient agitation during the mixing and spraying operation to ensure PROPI SUPER 25 EC remains in suspension.
9. Use nozzle screens no finer than 50 mesh. Keep by-pass line on or near the bottom of the tank to minimize foaming.
Apply only by fixed-wing or rotary aircraft equipment which has been functionally and operationally calibrated for the atmospheric conditions of the area and the application rates and conditions of this label. Label rates, conditions and precautions are product specific. Read and understand the entire label before opening this product. Apply only at the rate recommended for aerial application on this label. Where no rate for aerial application appears for a specific use, this product cannot be applied by any type of aerial equipment. Ensure uniform application. To avoid streaked, uneven or overlapped application, use appropriate marking devices.

AERIAL APPLICATION USE PRECAUTIONS:
Apply only when meteorological conditions at the treatment site allow for complete and even crop coverage. Apply only under conditions of good practice specific to aerial application as outlined in the National Aerial Pesticide Application Manual, developed by the Federal/Provincial/Territorial Committee on Pest Management and Pesticides.
Do not apply to any body of water. Avoid drifting of spray onto any body of water or other nontarget areas. Specified buffer zones should be observed.
Coarse sprays are less likely to drift; therefore, avoid combinations of pressure and nozzle type that will result in fine particles (mist). Do not apply during periods of dead calm or when wind velocity and direction pose a risk of spray drift. Do not spray when the wind is blowing towards a nearby sensitive crop, garden, terrestrial habitat (such as a shelter-belt) or aquatic habitat.

AERIAL APPLICATION OPERATOR PRECAUTIONS:
Do not allow the pilot to mix chemicals to be loaded onto the aircraft. Loading of premixed chemicals with a closed system is permitted. It is desirable that the pilot have communication apabilities at each treatment site at the time of application.
The field crew and the mixer/loaders must wear chemical resistant gloves, coveralls and goggles or face shield during mixing/loading, cleanup and repair. Follow the more stringent label precautions in cases where the operator precautions exceed the generic label recommendations on the ground application section.
All personnel on the job site must wash hands and face thoroughly before eating and drinking.
Protective clothing, aircraft cockpit and vehicle cabs must be decontaminated regularly.

Buffer zones:
Use of the following spray methods or equipment DO NOT require a buffer zone: hand-held or backpack sprayer and spot treatment.
The buffer zones specified in the table below are required between the point of direct application and the closest downwind edge of sensitive terrestrial habitats (such as grasslands, forested areas, shelter belts, woodlots, hedgerows, riparian areas and shrublands), sensitive freshwater habitats (such as lakes, rivers, sloughs, ponds, prairie potholes, creeks, marshes, streams, reservoirs and wetlands) and estuarine/marine habitats.
For tank mixes, consult the labels of the tank-mix partners and observe the largest (most restrictive) buffer zone of the products involved in the tank mixture and apply using the coarsest spray (ASAE) category indicated on the labels for those tank mix partners.

PRODUCT SPECIFIC PRECAUTIONS:
Read and understand the entire label before opening this product. If you have questions call the manufacturer at 1-888-760-0187 or obtain technical advice from the distributor or your provincial agricultural representative.
Fertilizer - Mixing and Spraying Instructions:
If desired, small amounts of nitrogen may be applied with PROPI SUPER 25 EC. The appropriate amount of urea can be dissolved in water and added to the spray tank before adding PROPI SUPER 25 EC. The rate of actual nitrogen must not exceed 10 kg/ha.
CAUTION: Excessive nitrogen concentrations may injure the crop.
NOTE: DO NOT add nitrogen when tank-mixing PROPI SUPER 25 EC with an herbicide.

WHEAT, BARLEY AND OATS INSTRUCTIONS FOR USE:
Apply PROPI SUPER 25 EC at the very early stages of disease. This could occur anytime during tillering or stem elongation. Typically, an application from the beginning of stem elongation up to flag leaf emergence is required.
PROPI SUPER 25 EC lasts about three weeks in the plant. If conditions favourable to disease continue after this length of time, another application will be necessary to maintain control. The second spray is usually applied at the time of head emergence. In most cases, this second application is essential to maintain control of the Septoria disease complex.
LAST APPLICATION MUST BE MADE AT LEAST 45 DAYS BEFORE HARVEST (45 day PHI).

HERBICIDE TANK-MIXING - WHEAT & BARLEY:
PROPI SUPER 25 EC can be tank-mixed with ONLY ONE of these herbicides:
2,4-D Amine
MCPA Amine
Buctril® M
Pardner®
Mextrol® 450
Approve®
HORIZON® 240EC Herbicide (Wheat Only)

AXIAL® 100EC Herbicide (Spring Wheat and Spring Barley Only) (FOR USE ONLY IN THE PRAIRIE AND PEACE RIVER, OKANAGAN AND CRESTON FLATS REGIONS OF BRITISH COLUMBIA)

BROADBAND® Herbicide (Spring Wheat (excluding durum) and Barley) (FOR USE IN THE PRAIRIE PROVINCES AND PEACE RIVER REGION OF BRITISH COLUMBIA ONLY)
Tank-mixing Precautions:
1. DO NOT tank-mix PROPI SUPER 25 EC Fungicide with herbicides for application onto Oats.
2. Weeds and crops must be at the correct stage of growth as specified in both the PROPI SUPER 25 EC Fungicide label and the tank mix partner label.
3. 2,4-D and MCPA formulations may be applied either by ground application or aerial application; tank-mixtures of PROPI SUPER 25 EC Fungicide and Buctril M, Mextrol 450, Approve, Pardner, or AXIAL 100EC Herbicide can only be applied by ground application.
4. For fields treated with AXIAL 100EC Herbicide, no crop may be seeded until the following year. There are no crop rotation limitations the year following application of AXIAL 100EC Herbicide.
5. Tank mixing with the herbicide AXIAL 100EC will slightly decrease PROPI SUPER 25 EC efficacy.
6. Consult the label of the herbicide partner for a list of weeds controlled, directions for use and precautions.
7. When tank mixing, adhere to the most restrictive label limitations and precautions.
8. Compatibility should always be confirmed by premixing small proportional quantities of water, PROPI SUPER 25 EC Fungicide, and the tank-mix partner in advance.
NOTE:
 DO NOT graze animals on treated green crops within three days of application of PROPI SUPER 25 EC Fungicide.
 DO NOT feed straw from crops treated with herbicide tank mixes to livestock.
HERBICIDE TANK-MIXING – WHEAT ONLY:
FOR USE ONLY IN THE PRAIRIE AND PEACE RIVER, OKANAGAN AND CRESTON FLATS REGIONS OF BRITISH COLUMBIA.
PROPI SUPER 25 EC can be tank-mixed with HORIZON 240 EC Herbicide for disease and grassy weed control.
Tank-mixing Precautions:
1. Do not apply by air.
2. Consult the label of HORIZON 240 EC Herbicide for a list of weeds controlled, directions for use and precautions.
3. Apply prior to emergence of the 4th tiller (herbicide timing).

TIMOTHY - FOR SALE FOR USE IN THE PRAIRIE PROVINCES ONLY 
INSTRUCTIONS FOR USE:
Apply PROPI SUPER 25 EC at the very early stages of disease. If conditions favourable to disease continue after this length of time, another application will be necessary to maintain control. DO NOT APPLY BY AIR.
LAST APPLICATION MUST BE MADE PRIOR TO 14 DAYS BEFORE HARVEST (14 day PHI).

TANK-MIXING – SEED CORN, FIELD CORN and SWEET CORN
PROPI SUPER 25 EC can be tank-mixed with the following partner:
MATADOR 120EC Insecticide
WARRIOR Insecticide
Ripcord
Tank-mixing Precautions:
1. DO NOT APPLY THE TANK MIX WITH WARRIOR INSECTICIDE BY AIR.
2. The tank mix of PROPI SUPER 25 EC + MATADOR120EC Insecticide or PROPI SUPER 25 EC + Ripcord can be applied by air and ground. Use 40 L of water per hectare when applying by air.
3. Insects and crops must be at the correct stage as specified on the PROPI SUPER 25 EC as well as MATADOR 120EC, WARRIOR Insecticide and Ripcord (PCP 15738) labels.
Follow the directions for use and precautions on all labels.
4. DO NOT apply within 14 days of harvest (14 day PHI) when using these tank-mixes on field and sweet corn.
5. Compatibility should always be confirmed by premixing small proportional quantities of water, PROPI SUPER 25 EC, and the tank-mix partner in advance.

LEGUME VEGETABLES (Crop Group 6) INCLUDING SOYBEANS
Edible-podded legume vegetables - Any succulent cultivar of edible podded bean (Phaseolus spp.) and any succulent cultivar of edible-podded pea (Pisum spp.): Bean (Phaseolus spp.) (includes runner bean, snap bean, wax bean); bean (Vigna spp.) (includes asparagus bean, Chinese longbean, moth bean, yardlong bean); jackbean; pea (Pisum spp.) (includes dwarf pea, edible-podded pea, snow pea, sugar snap pea); pigeon pea; soybean (immature seed); and sword bean.
Succulent shelled pea and bean - Any succulent shelled cultivar of bean (Phaseolus spp.) and garden pea (Pisum spp.): Bean (Phaseolus spp.) (includes lima bean, green bean); broad bean (succulent); bean (Vigna spp.) (includes black-eyed pea, cowpea, southern pea); pea (Pisum spp.) (includes English pea, garden pea, green pea); and pigeon pea.
Dried shelled pea and bean - Any dried cultivar of bean (Phaseolus spp.) and dried cultivar of pea (Pisum spp.): Dried cultivars of bean (Lupinus spp.) (includes grain lupin, sweet lupin, white lupin, and sweet white lupin); (Vigna spp.) (includes adzuki beans); (Phaseolus spp.) (includes field bean, kidney bean, lima bean (dry), navy bean, pinto bean, tepary bean, mung bean, rice bean, southern bean, urd bean); broad bean (dry); chickpea; guar; lablab bean; lentil; pea (Pisum spp.) (includes field pea); and pigeon pea.

RESISTANCE MANAGEMENT RECOMMENDATIONS:
For resistance management, PROPI SUPER 25 EC contains a Group 3 fungicide. Any fungal population may contain individuals naturally resistant to PROPI SUPER 25 EC and other Group 3 fungicides. A gradual or total loss of pest control may occur over time if these fungicides are used repeatedly in the same fields. Other resistance mechanisms that are not linked to site of action but specific for individual chemicals, such as enhanced metabolism, may also exist.
Appropriate resistance management strategies should be followed.
To delay fungicide resistance:
Where possible, rotate the use of PROPI SUPER 25 EC or other Group 3 fungicides with different groups that control the same pathogens.
Use tank mixtures with fungicide from a different group that is effective on the target pathogen when such use is permitted.
Fungicide use should be based on an integrated disease management program that includes scouting, historical information related to pesticide use and crop rotation and considers host plant resistance, impact of environmental conditions on disease development, disease thresholds, as well as cultural, biological and other chemical control practices.
Where possible, make use of predictive disease models to effectively time fungicide applications.
Monitor treated fungal populations for resistance development. Notify Sharda CropChem
Limited if reduced sensitivity of the pathogen to PROPI SUPER 25 EC is suspected.
If disease continues to progress after treatment with this product, do not increase the use rate.
Discontinue use of this product, and switch to another fungicide with a different site of action, if available.
Contact your local extension specialist or certified crop advisors for any additional pesticide resistance-management and/or IPM recommendations for specific crops and pathogens.