Trivapro AComparación de productos fitosanitariosComparación de productos fitosanitariosNotificar inexactitudesNotificar inexactitudes

For Use in Controlling Diseases on Cereals, Corn and Soybean

STORAGE
Keep in original container, tightly closed, during storage. Store in a cool, dry, well ventilated area away from feed and foodstuffs, and out of the reach of children and animals. To prevent contamination store this product away from food or feed.
Do not store below 0 C.

SPILL CLEANUP
Wear appropriate protective equipment (gloves, glasses, apron) when attempting to clean up the spill. If the container is leaking, secure leak and place the container into a drum or heavy gauge plastic bag. Contact Syngenta Canada Inc. (See EMERGENCY NUMBER) for further information.
For spills and leaks - contain the liquid with dikes of inert material (soil, clay, kitty litter, etc.). Absorb the spill onto inert material and shovel into a sealable waste container.
On hard surfaces - sprinkle spill area with detergent and scrub in a small quantity of water with a coarse broom. Let stand 10 minutes then absorb onto an inert material and shovel into the waste container.
On soil - remove the top 15 cm of soil in the spill area and replace with fresh soil. Dispose of all waste including scrub brush in accordance with provincial requirements.

DISPOSAL OF UNUSED, UNWANTED PRODUCT
For information on disposal of unused, unwanted product, contact the manufacturer or the provincial regulatory agency. Contact the manufacturer and the provincial regulatory agency in case of a spill, and for clean up of spills.

CONTAINER DISPOSAL OR REFILLING:
For returnable containers:
DO NOT reuse this container for any other purpose. This empty container may be returned to the point of purchase (distributor/dealer) for disposal.
For refillable containers:
DO NOT reuse this container for any other purpose. For disposal, this container may be returned to the point of purchase (distributor/dealer). It must be refilled by the distributor/dealer with the same product.
For recyclable containers:
DO NOT reuse this container for any purpose. This is a recyclable container, and is to be disposed of at a container collection site. Contact your local distributor/dealer or municipality for the location of the nearest collection site. Before taking the container to the collection site:
1. Triple- or pressure-rinse the empty container. Dispose of the rinsings in accordance with provincial requirements.
2. Make the empty, rinsed container unsuitable for further use.
If there is no container collection site in your area, dispose of the container in accordance with provincial requirements.

PRODUCT INFORMATION
TRIVAPRO A Fungicide is a broad spectrum, preventative fungicide with systemic and curative properties recommended for the control of important plant diseases in soybeans, corn and Crop Group 15 – Cereals. TRIVAPRO A Fungicide may be applied as a foliar spray in alternating spray programs or in tank mixes with other crop protection products. All applications should be made according to the use directions that follow.

GENERAL USE PRECAUTIONS
DO NOT apply TRIVAPRO A Fungicide through irrigation equipment.
DO NOT apply TRIVAPRO A Fungicide through any type of ultra-low volume (ULV) spray system (less than 30 litres per hectare).
DO NOT use in nurseries, greenhouses or landscape plantings.
As this product is not registered for the control of pests in aquatic systems, DO NOT use to control aquatic pests.
DO NOT contaminate irrigation or drinking water supplies or aquatic habitats by cleaning of equipment or disposal of waste.
A restricted entry interval (REI) of 1 day is required for workers hand-harvesting and detasseling treated corn.
Under certain conditions conducive to extended infection periods, use another registered fungicide for additional applications.

ROTATIONAL CROP RESTRICTIONS
Please see the following table for the crop rotational restrictions:
Rotational Crops - Planting Time From Last Application of Azoxystrobin- and Propiconazole-containing Products
All crops with Azoxystrobin/Propiconazole registered uses - 0 days
All other crops Intended for Food and Feed - 105 days
Oats and rye - 45 days

DIRECTIONS FOR USE
GROUND APPLICATION
It is important to check the physical compatibility of tank mixed pesticide products in a small volume prior to filling the sprayer. Check the compatibility of tank mixes containing TRIVAPRO A Fungicide using a jar test with proportionate amounts of mix partners, and water, before mixing in the spray tank.

MIXING INSTRUCTIONS:
1. Ensure that the sprayer interior is clean, then fill the spray tank with 1/2 the required amount of water and engage gentle agitation. Good agitation is indicated by a rippling or rolling action on the surface of the water.
2. Add any WG or DF formulation mix partners and agitate to ensure complete mixing.
3. Add TRIVAPRO A Fungicide (SE) and agitate to ensure complete mixing.
4. Add any additional SC formulation mix partners and agitate to ensure complete mixing.
5. Add any EC formulation mix partners and agitate to ensure complete mixing.
6. Fill the tank to 3/4 the required amount of water.
7. Add any solution (SN or SL) formulation mix partners and agitate to ensure complete mixing.
8. Finish filling the sprayer with water, maintaining good agitation.
9. After any break in spraying operations, agitate thoroughly before spraying again.
10. Spray the pesticide suspension the same day as mixing.
11. DO NOT mix, load or clean spray equipment where there is a potential to contaminate wells or aquatic systems.
When using chemical handling equipment to fill the sprayer, the following additional recommendations apply:
- WG and DF formulations are preferentially batch mixed.
- SC, SN, and SL formulations may be inducted or batch mixed.
- EC formulations are preferentially batch mixed.

EQUIPMENT SPECIFIC INSTRUCTIONS
Field sprayer application: DO NOT apply during periods of dead calm. Avoid application of this product when winds are gusty. DO NOT apply spray droplets which are smaller than the American Society of Agricultural and Biological Engineers medium classification ASABE Standard S-572.1). Boom height must be 60 cm or less above the crop or ground.

SPRAYING INSTRUCTIONS:
1. Water Volume: Apply in a minimum spray volume of 45 L/ha OR the volume given in the crop and pest specific instructions tabulated below, whichever is LARGER.
2. Sprayer Agitation: Use a jet agitator or liquid sparge tub which recirculates 10% or more of the tank per minute. DO NOT use an air sparger.
3. Pump: Screens should be used to protect the pump and prevent clogging. Use 16 mesh or coarser screens on the suction side of the pump. DO NOT place a screen in the recirculation line. Use 50 mesh or coarser screens between the pump and boom.
4. Spray Nozzles: 80 or 110 drift reducing flat fan (e.g. those with a pre-orifice or turbulence chamber) or air induction nozzles are recommended. Use 50 mesh nozzle screens. DO NOT use flood type nozzles, controlled droplet application equipment, spray foils or hollow cone nozzles.
5. Pressure: As recommended by the nozzle manufacturer to achieve ASABE medium sized droplets.
6. Apply at uniform speed and avoid overlapping. Shut off spray boom while starting, turning, slowing or stopping to avoid potential crop injury from over application.
Coarse sprays are less likely to drift, therefore, avoid combinations of pressure and nozzle type that will result in fine particles (mist). DO NOT apply during periods of dead calm or when wind velocity and direction pose a risk of spray drift. DO NOT spray when the wind is blowing towards a nearby sensitive crop, garden, terrestrial habitat (such as shelter-belt) or aquatic habitat.

AERIAL APPLICATION
Apply only by fixed-wing or rotary aircraft equipment which has been functionally and operationally calibrated for the atmospheric conditions of the area and the application rates and conditions of this label.
Label rates, conditions, and precautions are product specific. Read and understand the entire label before opening this product. Apply only at the rate recommended for aerial application on this label. When no rate for aerial application appears for the specific use, this product cannot be applied by any type of aerial equipment.
Ground Crew Precautions
DO NOT allow the pilot to mix chemicals to be loaded onto the aircraft. Loading of premixed chemicals with a closed system is permitted. It is desirable that the pilot have communication capabilities at each treatment site at the time of application.
All ground crew and the mixer/loaders must wear chemical resistant gloves, long-sleeved shirt and long pants, shoes and socks when mixing/loading, and during clean-up and repair activities. Follow the more stringent label precautions in cases where the operator precautions exceed the generic label recommendations on the existing field sprayer label.
All personnel on the job site must wash hands and face thoroughly before eating and drinking. Protective clothing, aircraft cockpit and vehicle cabs must be decontaminated regularly.
It is important to check the physical compatibility of tank mixed pesticide products in a small volume prior to filling the sprayer. Check the compatibility of tank mixes containing TRIVAPRO A Fungicide using a jar test with proportionate amounts of mix partners, and water, before mixing in the spray tank.

MIXING INSTRUCTIONS:
Mixing this product directly in the aircraft hopper IS NOT recommended. The use of chemical handling or managing equipment to load the hopper IS recommended. This product MAY BE inducted into a hopper which is prefilled with water or when the product and water are mixed prior to entering the hopper. This product MAY BE batch mixed and pumped into the hopper. In all cases the chemical handling equipment and hopper interior must be clean prior to use.
NOTE: WG and DF formulations are preferentially batch mixed.
NOTE: SC, SN, and SL formulations may be inducted or batch mixed.
NOTE: EC formulations are preferentially batch mixed.
It is NOT recommended to combine solid (WG or DF) formulations with liquid tank mix partners within a single batch. Batch mix WG or DF formulations first, pump into the hopper, and then add liquid tank mix partners by induction or as an additional batch mix. When tank mixing multiple products, follow the mixing order outlined below:
1. Pump water into the hopper to at least 1/4 to 1/2 of the desired spray volume. Engage hopper circulation, if possible.
2. Thoroughly batch mix any WG or DF formulation mix partners and agitate to ensure complete mixing. Pump into the hopper
3. Induct or thoroughly batch mix TRIVAPRO A Fungicide (SE) and any additional SE or SC formulations.
4. Thoroughly batch mix any EC formulation mix partners. EC formulations may be added to the batch from Step 3, if desired.
5. Induct or thoroughly batch mix any solution (SN or SL) formulation mix partners. SN/SL formulations may be added to the batch from Step 3, if desired.
6. Pump batch mixed SC, EC, and/or SN/SL products into the hopper.
7. Finish filling the hopper with water.
8. If it was not possible to engage hopper agitation in Step 1, do so as soon as possible once airborne.
9. Spray the pesticide suspension the same day as mixing.
10. DO NOT mix, load or clean equipment where there is a potential to contaminate wells or aquatic systems.

Pilot Precautions
Read and understand the entire label before using this product. Apply only when meteorological conditions at the treatment site allow for complete and even crop coverage. Apply only under conditions of good practice specific to aerial application as outlined in the National Aerial Pesticide Application Manual, developed by the Federal/Provincial/Territorial Committee on Pest Management and Pesticides. Suggested conditions for good aerial application are moderate temperatures (less than 25 C) and moderate relative humidity (greater than 40%). Light winds at altitude of 3-16 km/h are preferred, with 3-9 km/h considered optimal. Ensure uniform application and a uniform spray with minimum potential for drift. To avoid streaked, uneven or overlapped application, use appropriate marking technology. GPS based marking is preferred.
DO NOT apply to any body of water. Avoid drifting of spray onto any body of water or other nontarget areas. Specified buffer zones should be observed.
DO NOT apply during periods of dead calm. Avoid application of this product when winds are gusty. DO NOT apply when wind speed is greater than 16 km/h at flying height at the site of application. DO NOT apply spray droplets which are smaller than the American Society of Agricultural and Biological Engineers medium classification (ASABE Standard S-572.1). The nozzle distribution along the spray boom length MUST NOT exceed 65% of the wing or rotor span in order to reduce drift caused by turbulent wingtip vortices.

SPRAYING INSTRUCTIONS
1. Water Volume: Apply in a minimum spray volume of 45 L/ha OR the volume given in the crop and pest specific instructions tabulated below, whichever is LARGER.
2. Spray Nozzles: Use only ASABE medium or coarse nozzles rated as delivering droplets of volume median diameter of 300 microns or greater.
3. Pressure: As recommended by the nozzle manufacturer to achieve ASABE coarse or medium sized droplets.
4. Ensure hopper agitation is engaged whenever possible during flight.
Coarse sprays are less likely to drift, therefore, avoid combinations of pressure and nozzle type that will result in fine particles (mist). DO NOT apply during periods of dead calm or when wind velocity and direction pose a risk of spray drift. DO NOT spray when the wind is blowing towards a nearby sensitive crop, garden, terrestrial habitat (such as shelter-belt) or aquatic habitat.

Product-Specific Precautions
Read and understand the entire label before opening this product. If you have questions, call the manufacturer at 1-87-SYNGENTA (1-877-964-3682) or obtain technical advice from the distributor or your provincial agricultural representative. Application of this specific product must meet and/or conform to the following:

SPRAY DRIFT MANAGEMENT
ATTENTION
TRIVAPRO A Fungicide is extremely phytotoxic to certain apple varieties.
AVOID SPRAY DRIFT. Extreme care must be used to prevent injury to apple trees (and apple fruit).
DO NOT spray TRIVAPRO A Fungicide where spray drift may reach apple trees.
AVOID spraying when conditions favor drift beyond area intended for application. Conditions which may contribute to drift include thermal inversion, wind speed and direction, sprayer nozzle/pressure combinations, spray droplet size, etc.
DO NOT use spray equipment which has been previously used to apply TRIVAPRO A Fungicide to spray apple trees. Even trace amounts can cause unacceptable phytotoxicity to certain apple and crabapple varieties.
AVOIDING SPRAY DRIFT IS THE RESPONSIBILITY OF THE APPLICATOR.