Clayton AspectPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

CROP SPECIFIC INFORMATION

Good weed control depends on burying any trash or straw before or during seedbed preparation.
Seedbeds must have a firm, fine tilth.
Loose or cloddy seed beds must be consolidated otherwise crop damage may result due to inadequate seed cover.
For pre-emergence treatments, seed should be covered with a minimum of 32 mm of settled soil.
Apply via a horizontal boom sprayer.
Apply in 200-400 L/ha as a MEDIUM spray (BCPC category).
Use the higher volume where crop or weed foliage is dense.
A spray pressure of at least 2 bars is advised.
Good, even spray coverage of soil and weeds is essential.
Ensure that spray swaths do not overlap.
To prevent damage, care must be taken to avoid drift onto neighbouring crops.
Winter wheat (all varieties): Apply pre or post-emergence up to 31st of December in the year of planting and before the third tiller stage.
Winter barley (all varieties): Apply pre or post-emergence before the 31st of December and before the fourth tiller stage.

MIXING

Shake the container well before use. Half fill the spray tank with clean water and add the required amount of ASPECT. Wash out the container and add the washings to the spray solution, before topping up with clean water.
Maintain continuous agitation of spray solution during mixing and loading and until spraying is complete.
Do not leave the sprayer filled with the spray solution standing for long periods.
Wash out the sprayer thoroughly after use using a wetting agent or proprietary tank cleaner with two rinses