Clayton RiftPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

Clayton Rift can be used on all varieties of winter and spring wheat, winter and spring barley, triticale and winter rye between the growth stages specified below.

Soil and Weather
Clayton Rift can be used on all soil types. Weed control may be reduced when conditions are very dry.

Volume and Application
Before using Clayton Rift, spraying equipment must be clean and free from contamination with other pesticides.
Application should be made in 200L water per hectare using suitable ground equipment to give good spray cover of the weeds. In thick or dense weeds, use higher water volumes up to 400L water per hectare to ensure good spray cover of the weeds. Use a conventional field crop sprayer at a pressure to 2 – 3 bars and apply as a MEDIUM spray (as defined by BCPC). Care should be taken not to overlap spray swaths.

Dose and Timing
Apply Clayton Rift at 80 to 100 g/ha of product.
Clayton Rift must only be applied in the spring after 1st February, from the 3 leaf stage up to and including the flag-leaf fully emerged stage of the crop. Clayton Rift should not be applied within 7 days of rolling the crop. Do not apply Clayton Rift more than once to any cereal crop.

Mixing
Quarter fill the spray tank with clean water. Start the agitation and add the required amount of Clayton Rift directly to the tank without prior mixing. Continue agitation whilst topping up the tank and while spraying.

Compatibility
In any tank mix add Clayton Rift to the tank first and ensure it is fully dispersed before adding the partner product.
Do not allow Clayton Rift to come into contact with undiluted pesticide concentrate.
Products should only be tank-mixed if each product can be applied within the label guidelines for its use.
Joint application or sequence with some other sulphonylurea or ALS inhibiting herbicides may be applied to a crop
PROVIDING it is within the label guidelines for the other product. Consult your supplier or adviser for more information.
Do not tank mix Clayton Rift with chlorpyrifos. Allow a minimum of 14 days between application of Clayton Rift and any chlorpyrifos treatment.