DeflectPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

DIRECTIONS FOR USE

IMPORTANT: This information is approved as part of the Product Label. All instructions within this section must be read carefully in order to obtain safe and successful use of this product.

Restrictions or Warnings
DO NOT apply if crop is stressed due to water logging, drought, nutrient deficiency or pest infestation.
DO NOT apply during prolonged periods of frosty weather. Frost following application may cause crop damage.
DO NOT apply if heavy rain is expected within 4 hours.
DO NOT overlap spray swaths.
Crops may suffer some transient damage such as bleaching which is normally outgrown without effecting yield.
DO NOT direct drill autumn sown broad-leaved crops following application of DEFLECT in the previous crop.
DO NOT treat broadcast crops.
DO NOT roll autumn treated crops until the spring.
DO NOT harrow the crop at any time following application.
DO NOT apply to soils with greater than 10% organic matter.
DO NOT treat undersown cereals or those due to be undersown.

Crop specific information
Pre or post emergence use on winter wheat, winter barley and spring barley.
Early post emergence on durum wheat.
Post emergence on spring wheat.
Use pre emergence on rye and triticale.
Do not treat undersown cereals or those due to be undersown.
Avoid spray drift onto neighbouring crops.

Mixing and Spraying
Ensure the sprayer is clean and in good working order. Calibrate according to the sprayer manufacturers recommendations.
Half fill the spray tank with clean water and begin agitation. Add the required quantity of DEFLECT to the tank and complete filling. Continuous agitation must be maintained until spraying is complete.
All application equipment must be thoroughly cleaned using a wetting agent or proprietary tank cleaner prior to storage or use on another crop.
Do not leave the sprayer standing with the spray mixture in it for a long period of time.