HurlerPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

200g/l Fluroxypyr

Emulsifiable concentrate

0.75 – 2.0 L/ha

300 – 400 L/ha

Depends on crop/situation. See product label

MEDIUM spray. Nozzle pressure not exceeding 2.5 bar (35 psi)

Pack size           1 L                       5 L

 

Barclay Hurler is a translocated herbicide taken up by the leaves of weeds. It is essential that the target weeds have fully emerged before application and that good spray cover of the weed foliage is achieved. Weeds which emerge after application are not controlled.

Growing Conditions

Best results are achieved against small weeds growing actively under warm, moist conditions; these conditions are particularly important for the control of cleavers. Ensure that crops are vigorous with growth unaffected by frost, pests, disease, nutrient deficiency or moisture stress before treatment. Do not treat waterlogged crops or crops under drought stress.

 

 

Crop:Autumn Application to Winter Wheat and Winter Barley

Rate of Barclay Hurler:0.5 l/ha HURLER + recommended rate of HBN~

Weeds Controlled and latest stage of control:

Common chickweed (50mm)

Field forget me not (50 mm)

Henbit dead-nettle (6 true leaves)

Red dead-nettle (6 true leaves)

Charlock (Up to 6 true leaves)

Common poppy (Up to 6 true leaves)

Groundsel (Up to 6 true leaves)

Mayweed SPP (Up to 6 true leaves)

Shepherd’s purse (Up to 6 true leaves)

Speedwell SPP (Up to 6 true leaves)

Volunteer rape (Up to 6 true leaves)

Time of Application   for Crop:From two leaf stage of the crop until the end of February (but not after first node detectable stage GS 31

*Autumn Applications will not control weeds which germinate after spraying. In most circumstances a follow-up spray will be necessary to obtain season long weed.

Rate of Barclay Hurler:0.75 l/ha HURLER + recommended rate of HBN~

Weeds Controlled and latest stage of control:Cleavers (50mm)

Time of Application   for Crop:Applications can be made to crops sewn in the autumn.

 

Crop:Spring Application to Winter Wheat and Winter Barley.

Rate of Barclay Hurler:1 l/ha

Weeds Controlled and latest stage of control:Cleavers (flowering),Common chickweed (flowering), Black-bindweed (to 6 leaves), Red dead-nettle (to 4 leaves), Knotgrass (to 2 leaves)

Time of Application   for Crop:From the two leaf stage of the crop (GS12) to before the late boot stage (before GS 45).

Rate of Barclay Hurler:2 l/ha in 300 – 400 l/ha water see RESIDUES, DO NOT TANK-MIX BARCLAY HURLER WITH ANY OTHER, PRODUCT when using at 2 l/ha

Weeds Controlled and latest stage of control:Above weeds plus Volunteer potatoes (10-40 cm (4-16”) high).Complete kill of haulm will not be achieved but it will be stunted; optimum control obtained when haulm 15cm (6”) high.

Time of Application   for Crop:From the third node detectable stage of the crop to before the late boot stage (before GS 45).

 

Crop:Spring Application to Winter oats, Durum wheat,Rye,  Triticale

Rate of Barclay Hurler:1 l/ha.

Do not tank-mix with any herbicide for use on triticale.

Weeds Controlled and latest stage of control:

Cleavers (flowering)

Common chickweed (flowering)

Black-bindweed (to 6 leaves)

Red dead-nettle (to 4 leaves)

Knotgrass (to 2 leaves)

Time of Application   for Crop: From the two leaf stage of the crop (GS 12) but before the first node detectable stage (Before GS 31).

 

Crop:Spring wheat Spring barley

Rate of Barclay Hurler:0.75 l/ha

Weeds Controlled and latest stage of control:

Cleavers (to 10cm)

Common chickweed (to 10cm)

Black-bindweed (to 4 leaves)

Knotgrass (to 2 leaves)

Time of Application   for Crop:From the two leaf stage of the crop (GS 12) to before the first node detectable stage (GS 31).

 

Crop:Spring oats

Rate of Barclay Hurler:0.75 l/ha

Weeds Controlled and latest stage of control:

Time of Application   for Crop:From the two leaf stage of the crop (GS 12) to before the first node detectable stage (GS 31).

 

Crop:Forage maize

Rate of Barclay Hurler:1 l/ha(14 fl.oz/ac)

Weeds Controlled and latest stage of control:Black nightshade (cotyledons – 6 true leaves)

Time of Application   for Crop:From 3-6 leaves unfolded and before the crop is 20cm (8”) high and before any buttress roots start to develop at the first node.*DO NOT apply to forage and grain maize beyond the recommended growth stages or in a tank-mix with any other product.

 

Newly sown and established grass leys and permanent pasture may be treated with Barclay Hurler for the control of annual and perennial broad-leaved weeds. Do not spray swards containing clovers or other legumes if these are important constituents of the sward.

Newly sown grass leys

0.75 l/ha

Common chickweed (to 5cm)

In early autumn when the grasses are firmly established and are tillering and the weeds are growing actively.

Established grassland

2 l/ha in 300 - 400 l/ha water

Pre-flowering weeds of: Broad-leaved dock Common nettle (reduction of top-growth)

normally in spring at the rosette stage, but may be applied 14-21 days after cutting when the weed foliage has regrown. Repeat if necessary the following year.Common nettle: up to mid-June when actively growing.

Established grassland

2 l/ha

Bramble, Broom

Spray in June-August when actively growing but before plant begins to senesce in the Autumn. It is essential that, particularly with large bushes, all the foliage is thoroughly wetted or incomplete kill may result.

 

 

Optimum results with Barclay Hurler can only be achieved when weeds are actively growing under good soil and weather conditions and the crop is vigorously competitive. These conditions become especially important if cleavers are to be controlled, more so if Barclay Hurler is to be applied alone in cereals without the benefit of a product in tank-mixture giving complementary activity on cleavers. Do not apply Barclay Hurler during periods of cold nights or if frost is forecast.

 

Do not roll or harrow crops within seven days of treatment with Barclay Hurler.

 

Do not use Barclay Hurler on crops undersown with clovers or other legumes. Barclay Hurler may be used on crops undersown with grasses only provided that these are firmly established and are tillering.

 

Apply to dry foliage. Do not spray if rain is imminent. Avoid spray drift onto nearby crops or areas. Avoid overlapping spray swaths.

 

Do not use on crops grown for seed production

 

Cereals and forage maize: apply as a MEDIUM spray at 2-2.5 bar (30-35 psi) by conventional hydraulic ground-operated sprayer in 170-340 l/ha water to give good coverage of the target weeds; increase the spray volume to 300-400 l/ha water when treating volunteer potatoes. Use the higher spray volume for application in dense crops or when weeds are large or have become hardened. Apply to dry foliage.

 

Grassland: apply as a MEDIUM spray at 2-2.5 bar (30-35 psi) by conventional hydraulic ground-operated sprayer in 200-400 l/ha, using a minimum 300 l/ha on established grassland, to give good coverage of the target weeds. Use the higher spray volume for application in dense crops or when weeds are large. When overall spraying is not justified, small weed infested areas or individual weeds may conveniently be spot treated by knapsack sprayer or hand lance connected to a powered conventional hydraulic sprayer. Preferably use a flood jet to avoid spray drift. Spray to just wet the weed foliage evenly but before run-off occurs.

 

Barclay Hurler is compatible in tank-mix with the following approved formulations. When tank-mixing Barclay Hurler with a partner, the Directions for Use of the partner product must be strictly observed, together with the Directions for Use of this label. Mix Barclay Hurler in the spray tank first except when mixing with wettable powders, suspension concentrates or water dispersible granules unless directed otherwise. Spray out immediately after mixing. Do not tank-mix with any herbicide when treating triticale.

Residues

Do not sow peas, beans, clovers or any other legume for 12 months on land treated with Barclay Hurler at 2 l/ha (28 fl.oz). All manure or crop residues derived from crops treated with Barclay Hurler at 2 l/ha (28 fl.oz/ac) must be returned to grassland or land to be cropped with cereals. All straw from crops treated at 2 l/ha must not be incorporated back into the soil.

 

Directly after each days use with Barclay Hurler, wash out the sprayer thoroughly with clean water and a wetting agent recommended for the cleaning of sprayers. Traces of fluroxypyr left in the sprayer may damage susceptible crops when the equipment is subsequently used.

 

Pour the required quantity of Barclay Hurler into the spray tank already half-filled with water and under agitation. Top up the spray tank with water to the required level. Maintain agitation during spraying and until the tank is sprayed out.