IceniPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

A growth regulator for crop height reduction. An emulsifiable concentrate containing 250 g/L (25.5% w/w) of trinexapac-ethyl.

DIRECTIONS FOR USE
IMPORTANT: This information is approved as part of the Product Label. All instructions within this section must be carefully read in order to obtain safe and successful use of this product.

RESTRICTIONS
1) Avoid spray drift onto neighbouring crops.
2) Only use on crops at risk of lodging.
3) Do not apply if rain or frost is expected or if the crop is wet.
4) Do not spray crops under stress or to crops suffering from waterlogging, pest attack, disease or frost.

GENERAL INFORMATION
ICENI is an emulsifiable concentrate formulation containing 250 g/L (25.5 % w/w) trinexapac-ethyl. It is a growth regulator for crop height reduction, which can lead to lodging control and yield protection in all varieties of winter and spring wheat, winter and spring barley, winter and spring oats, rye, triticale and durum wheat. ICENI is absorbed by the leaves and stems of cereals and ryegrass. It has no root or soil activity. ICENI is absorbed quickly into the plant tissue and rapidly translocated to the growing parts where the elongation of the stem internodes is inhibited thereby reducing the straw height. This reduction in straw height reduces the risk of lodging in cereals and ryegrass. ICENI treatment may lead to ears remaining erect through to harvest.

CROPS
Winter Wheat
Apply ICENI at up to 0.4 l/ha between the leaf sheath erect stage and the flag leaf fully emerged stage (GS30–39).

Spring Wheat
Apply ICENI at up to 0.4 l/ha between the leaf sheath erect stage and the second node detectable stage (GS30–32).

Winter Barley
Apply ICENI at up to 0.4 l/ha between the leaf sheath erect stage and the second node detectable stage (GS30–32). or Apply ICENI at up to 0.6 l/ha between the flag leaf just visible stage and the flag leaf fully emerged stage (GS37–39).

Spring Barley
Apply ICENI at up to 0.5 l/ha between the leaf sheath erect stage and the second node detectable stage (GS30–32).

Winter and Spring Oats
Apply ICENI at up to 0.4 l/ha between the leaf sheath erect stage and the first node detectable stage (GS30–31).

Rye, Triticale and Durum Wheat
Apply ICENI at up to 0.4 l/ha between the leaf sheath erect stage and the second node detectable stage (GS30–32).

MIXING AND SPRAYING
Spray Volume
Apply ICENI in a minimum of 200 litres water per hectare. Increased watervolume may assist spray penetration in larger or denser crop canopies.

Spray Nozzles
A MEDIUM (BCPC) spray quality is preferred for application of ICENI. A spray pressure of 2-3 bar is recommended. ICENI MAPP 16835

Mixing and Spraying
Make sure the sprayer is set to give an even application at the correct volume. Fill the spray tank with half the required volume of clean water and start agitation. Add the required amount of ICENI and continue agitation whilst adding the rest of the water. Agitate the mixture thoroughly before use and continue agitation during spraying. Take particular care to avoid overlapping of spray swaths. Thoroughly wash all spray and measuring equipment with water and a wetting agent immediately after use.