Inception XproPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

A carboxamide fungicide for the control of stem-base and foliar diseases in winter and spring barley.

CROP SPECIFIC INFORMATION
Winter and spring Barley
Apply InceptionXpro at 1.0 L/ha in 100–300 L water/ha. Apply as a MEDIUM spray quality (as defined by BCPC). A spray pressure of 2–3 bar is recommended. Maximum total dose per crop is 2.0 L/ha. InceptionXpro may be applied at any stage up to beginning of flowering in barley

MIXING AND SPRAYING
Thoroughly shake the pack before use.
Add the required quantity of InceptionXpro to the half-filled spray tank with the agitation system in operation and then fill to the required level. Continue agitation at all times during spraying and stoppages until the tank is completely empty. Spray immediately after mixing. Sprayers should be thoroughly cleaned before use, and filters and jets checked for damage and blockages.
Boom height should be adjusted to ensure even coverage of the crop, particularly at later growth stages. The correct height is one at which the spray from alternate nozzles meets just above the crop. In dense crops, at later growth stages, higher water volumes should be used. Spray equipment should be thoroughly cleaned with detergent after use.

RESISTANCE
InceptionXpro contains a SDH inhibitor fungicide and should always be used in tank mixtures with fungicides having a different mode of action (e.g. azoles) and which will control the target disease. No more than two applications of SDH inhibitors must be applied to the same barley crop.